w41k3r Posted June 10, 2009 Share Posted June 10, 2009 any tips on undoing the nuts halfway down on the manifold got the 2 closest to the car loosend but the 2 facing the firewall are hardcore to get to especially the one close to the engine Quote Link to comment Share on other sites More sharing options...
Supranature Posted June 10, 2009 Share Posted June 10, 2009 (edited) I think that they need to be accessed underneath via a ramp, using copious amounts of plusgas and a long bar. They also have a tendency to snap, ( studs that is) Do you already have a 2nd decat? If so, are you aware the noise your car will make? Edited June 10, 2009 by Supranature (see edit history) Quote Link to comment Share on other sites More sharing options...
Al Massey Posted June 10, 2009 Share Posted June 10, 2009 I completey soaked mine in WD40 and left for 20 mins then used a small gas torch and my long ratchet and gently got them off, after that they were fine to undo Quote Link to comment Share on other sites More sharing options...
AlexJames Posted June 10, 2009 Share Posted June 10, 2009 take it down your local garage, 20 quid later.. all done, no hassle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.