w41k3r Posted June 5, 2009 Share Posted June 5, 2009 ive got a 1st and 2nd decat for my n\a just wondered the 1st decat the y pipe what gasket do i use to connect to the manifold part just standard toyota gaskets or do i need to use paste as im not really a fan of paste never really had much luck with it thanks Link to comment Share on other sites More sharing options...
w41k3r Posted June 5, 2009 Author Share Posted June 5, 2009 anyone?????????? before i start this dont wanna tard it up thanks Link to comment Share on other sites More sharing options...
merckx Posted June 5, 2009 Share Posted June 5, 2009 Either will work. I prefer exhaust assembly paste as it will seal most exhaust joints and you don't have to buy something specific to a particular model car like you do with gaskets. You've just got to use plenty of paste and you'll get a good seal every time. Link to comment Share on other sites More sharing options...
Homer Posted June 5, 2009 Share Posted June 5, 2009 As above. With aftermarket exhausts where the face has not been machined I've always had more success using paste rather than gaskets. If the faces are machine finished then the stock gaskets will be fine. Link to comment Share on other sites More sharing options...
w41k3r Posted June 5, 2009 Author Share Posted June 5, 2009 lol what paste is the best to use thanks for advice Link to comment Share on other sites More sharing options...
merckx Posted June 6, 2009 Share Posted June 6, 2009 Any exhaust assembly paste will do, make sure you don't buy repair paste type stuff. Link to comment Share on other sites More sharing options...
w41k3r Posted June 6, 2009 Author Share Posted June 6, 2009 thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now