b_have Posted April 13, 2005 Share Posted April 13, 2005 Ok, having almost zero experience of fitting/painting bodykits, I need to know how to fit my Veilside sideskirts. Is it a kinda 'first fix' system of offering them up, cutting for a good fit, then removing, painting and re-fitting? Or are they fitted/filled and painted in situe? many thanks, Charlie. Quote Link to comment Share on other sites More sharing options...
b_have Posted April 14, 2005 Author Share Posted April 14, 2005 Anyone? Quote Link to comment Share on other sites More sharing options...
dude Posted April 14, 2005 Share Posted April 14, 2005 Who supplied them dude Dude Quote Link to comment Share on other sites More sharing options...
b_have Posted April 14, 2005 Author Share Posted April 14, 2005 Originally, Chris at Hyperformance. Quote Link to comment Share on other sites More sharing options...
keron Posted April 14, 2005 Share Posted April 14, 2005 personally, i would trial fit them (offer them up) and see where they may need shaving/cutting etc to fit spot on...i would then fit them on the car properly and then get them painted as they can be tricky to fit once painted and you would not want to have them painted again!....plus it would be easier to get a better colour match. Quote Link to comment Share on other sites More sharing options...
dude Posted April 14, 2005 Share Posted April 14, 2005 Sorry to disagree , Paul E's only need a very slight trimming around the front wheel arch bit , prime em and paint em off the car , i can take mine off in 5 mins a side they should fit that well !!! Dude Quote Link to comment Share on other sites More sharing options...
b_have Posted April 14, 2005 Author Share Posted April 14, 2005 Thanks Dude, so, they should be removeable ala oem. thets what i needed to know. Quote Link to comment Share on other sites More sharing options...
mrboost Posted April 14, 2005 Share Posted April 14, 2005 I have to agree I always do a trial fitment any modifications then can be made before painting. If you require and help give us a pm or email [email protected] and I will do my best to help you out. Quote Link to comment Share on other sites More sharing options...
b_have Posted April 14, 2005 Author Share Posted April 14, 2005 Many thanks guys Quote Link to comment Share on other sites More sharing options...
Dragonball Posted April 14, 2005 Share Posted April 14, 2005 Sorry to disagree , Paul E's only need a very slight trimming around the front wheel arch bit , prime em and paint em off the car , i can take mine off in 5 mins a side they should fit that well !!! Dude Thanks Dude they should be a really quick check fitting and then painting mate Sometime you get really thick sprayed on fibreglass (especially under the door and under the sill - where they have to be bent out slightly to clip in) and then you have problems - sign of a cheap make These normally cost more to modify then paying slightly more for those that do fit well the first time (i.e.mine:thanku: ) YPCYPT Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.