Terminator Posted May 15, 2009 Share Posted May 15, 2009 Sold Had last minute change of plans, I want more power. Got these injectors back from the testers this week, on Wednesday 13 May. Results were excellent; at 50% duty, all injectors flowed exactly 88cc, in a 10 second burst at 3 bar, 3m/sec open - 3 m/sec closed so a perfectly matched set. Test papers provided. So drop into a BL,Titan, PHR etc rail and get mapping. They have new filter baskets, new seals top and bottom. These injectors originally came from Titan, who use then in their fuel kits, Titan only use the best. These are low impedance 2.1 ohm, top feed injectors, 14.5mm O rings each end. As fully tested is recent I am asking £340 + post. Link to comment Share on other sites More sharing options...
Terminator Posted May 16, 2009 Author Share Posted May 16, 2009 Just dropped the price. Would take VNO. Link to comment Share on other sites More sharing options...
Terminator Posted May 18, 2009 Author Share Posted May 18, 2009 Any sensible offer considered. Link to comment Share on other sites More sharing options...
Terminator Posted May 19, 2009 Author Share Posted May 19, 2009 Bump Link to comment Share on other sites More sharing options...
Terminator Posted May 22, 2009 Author Share Posted May 22, 2009 £300 posted? Link to comment Share on other sites More sharing options...
dandan Posted May 22, 2009 Share Posted May 22, 2009 I don't suppose you have a spare top mount rail do you Phil? Link to comment Share on other sites More sharing options...
Terminator Posted May 23, 2009 Author Share Posted May 23, 2009 Sorry Dan no rail available. Link to comment Share on other sites More sharing options...
Terminator Posted May 23, 2009 Author Share Posted May 23, 2009 Pictures added This set of six were part of a batch of matched sets from Titan Racing New Orings and filter buckets Six hole fuel outlet Injector body Batch number Part number and size 95lb or 1008cc Link to comment Share on other sites More sharing options...
Terminator Posted September 2, 2009 Author Share Posted September 2, 2009 Still got these, any sensible offer considered. Link to comment Share on other sites More sharing options...
hodge Posted September 3, 2009 Share Posted September 3, 2009 p.med Link to comment Share on other sites More sharing options...
michel lane Posted September 3, 2009 Share Posted September 3, 2009 200 ?.... Link to comment Share on other sites More sharing options...
dude Posted September 4, 2009 Share Posted September 4, 2009 Phil walks away holding nuts!!!!!! Shame they werent bigger dude I would have had them:cool: Link to comment Share on other sites More sharing options...
Terminator Posted September 8, 2009 Author Share Posted September 8, 2009 Will take £250 Link to comment Share on other sites More sharing options...
Terminator Posted September 9, 2009 Author Share Posted September 9, 2009 Just to clarify, these are top feed injectors, they do not fit the stock rail, HKS or other Japanese style rails. They also require different plugs to be wired into the loom. If required I will include a set of plugs with tails. Link to comment Share on other sites More sharing options...
Terminator Posted September 25, 2009 Author Share Posted September 25, 2009 Sold Link to comment Share on other sites More sharing options...
Recommended Posts