csa Posted May 5, 2009 Share Posted May 5, 2009 When I change my oilfilter I'd like to turn the engine without ignition to get the oil round the engine and filter before fireing up. is there a fuse I could pull? (I'm running AEM EMS) Link to comment Share on other sites More sharing options...
JustGav Posted May 5, 2009 Share Posted May 5, 2009 Disconnect the ignitor pack? Link to comment Share on other sites More sharing options...
jevansio Posted May 5, 2009 Share Posted May 5, 2009 I pulled teh 2 EFI fuses when I installed my oil cooler to get the oil circulating without firing up (I also run AEM) Link to comment Share on other sites More sharing options...
Ryan.G Posted May 6, 2009 Share Posted May 6, 2009 I pulled teh 2 EFI fuses when I installed my oil cooler to get the oil circulating without firing up (I also run AEM) Link to comment Share on other sites More sharing options...
Guest Budz86 Posted May 10, 2009 Share Posted May 10, 2009 Would this work on a stock NA? Need to change the oil soon and want to get it round the engine before starting it up Link to comment Share on other sites More sharing options...
Benjy Posted May 10, 2009 Share Posted May 10, 2009 If you're only doing an oil change, there will still be enough oil on the bores and in the lifters to protect the engine on first start up with new oil. whichever way you look at it, the starter motor's gonna turn the engine over with or without the car starting! Did mine on thursday with no problems! If you really want to do it though, you can pull the king lead off the distributor or disconnect the coil pack. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now