dandan Posted March 26, 2009 Share Posted March 26, 2009 Can anyone shed any light on the following please? I have been looking at lots of parts to buy and have a few questions about certain parts that seem to have more than one part number. I'm after stuff for a 1996 RZ TT Six Speed with Torsen Diff Rear Suspension 48730-14040 or 48730-14030 for ARM ASSY, REAR SUSPENSION, NO.2 RH 48740-14070 or 48740-14060 for ARM ASSY, REAR SUSPENSION, NO.2 LH Front Suspension 48610-19025 or 48610-29046 for ARM ASSY, FRONT SUSPENSION UPPER, RH 48630-19025 or 48630-29046 for ARM ASSY, FRONT SUSPENSION UPPER, LH 48068-14080 or 48068-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH 48069-14080 or 48069-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH 48190-14010 or 48190-24040 for CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH Steering 45503-39015 or 45503-59015 for END SUB-ASSY, STEERING RACK NO.1 Rear Driveline 04437-24030 or 04437-24031 for BOOT KIT, REAR DRIVE SHAFT INBOARD JOINT Any ideas? Cheers Dan Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 26, 2009 Share Posted March 26, 2009 Can anyone shed any light on the following please? I have been looking at lots of parts to buy and have a few questions about certain parts that seem to have more than one part number. I'm after stuff for a 1996 RZ TT Six Speed with Torsen Diff Rear Suspension 48730-14040 or 48730-14030 for ARM ASSY, REAR SUSPENSION, NO.2 RH 48740-14070 or 48740-14060 for ARM ASSY, REAR SUSPENSION, NO.2 LH Front Suspension 48610-19025 or 48610-29046 for ARM ASSY, FRONT SUSPENSION UPPER, RH 48630-19025 or 48630-29046 for ARM ASSY, FRONT SUSPENSION UPPER, LH 48068-14080 or 48068-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH 48069-14080 or 48069-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH 48190-14010 or 48190-24040 for CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH I looked at a few of the above and the difference is the lower numbers are from 93/05 - 96/05. Then from 96/05 onwards. Steering 45503-39015 or 45503-59015 for END SUB-ASSY, STEERING RACK NO.1 This was substituted with 45503-39095 Rear Driveline 04437-24030 or 04437-24031 for BOOT KIT, REAR DRIVE SHAFT INBOARD JOINT Appears to be just a substitution Any ideas? Cheers Dan Bold replies to your text. Quote Link to comment Share on other sites More sharing options...
Homer Posted March 26, 2009 Share Posted March 26, 2009 Can you confirm if your chassis number is less than 0035274? There seems to be a revision after that date. The part numbers you have are a bit mixed up, but if you confirm above I'll go through them The rear suspension ones are mixing up link arms and lower suspension arms. Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 Brilliant - thanks for that mate. I'd better go check my V5 for the manufacture date as it is around that crossover time....July I think. It would be interesting to know what changed with those items in May of 1996 Quote Link to comment Share on other sites More sharing options...
Homer Posted March 26, 2009 Share Posted March 26, 2009 Crosover date was May acording to EPC, exact chassis number is above. But as your one is a facelift its going to be above that number. Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 Sorry Homer - just saw your reply. My number is in the region of 0036XXX. The numbers came from the ToyoDIY pages originally. I'd be very grateful if you could point out which are correct for that chassis number. Edit: Colsoop has already confirmed that I think...looks like I need the higher numbers? Quote Link to comment Share on other sites More sharing options...
Homer Posted March 26, 2009 Share Posted March 26, 2009 It looks like cols got it, but if you want to double check, PM me your chassis number and model code and I'll see if it's in my epc. Quote Link to comment Share on other sites More sharing options...
Homer Posted March 26, 2009 Share Posted March 26, 2009 Received your PM Dan, here's what my epc is showing as the correct numbers. I don't trust this though as Cols information differs slightly. Rear Suspension 48730-14040 or 48730-14030 for ARM ASSY, REAR SUSPENSION, NO.2 RH 48740-14070 or 48740-14060 for ARM ASSY, REAR SUSPENSION, NO.2 LH Front Suspension 48610-19025 or 48610-29046 for ARM ASSY, FRONT SUSPENSION UPPER, RH 48630-19025 or 48630-29046 for ARM ASSY, FRONT SUSPENSION UPPER, LH 48068-14080 or 48068-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH 48069-14080 or 48069-14090 for ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH 48190-14010 or 48190-24040 for CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH Neither are correct on the adjuster. Can you confirm these are the compbined bolt/cam adjuster ones that secure the lower arm? There's two on each arm so two part numbers needed Steering 45503-39015 or 45503-59015 for END SUB-ASSY, STEERING RACK NO.1 Neither appear to be correct, mine shows 45503-39095. That seems to be an internal part of the steering rack - the rod that comes out the rack with the thread on it that the tie rod connects to. Rear Driveline 04437-24030 or 04437-24031 for BOOT KIT, REAR DRIVE SHAFT INBOARD JOINT Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 (edited) I'll try this in sections... All the images are from the online EPC and I've circled the necessary items in MS Paint The text extracts are a copy paste from the right hand side of the online EPC page (of the items that crop up when you highlight the circled part in the image) Steering: 45503A END SUB-ASSY, STEERING RACK NO.1 45503‑39095 JZA80 2 $134.46 45503‑59015 JZA80 2 $121.03 Edited March 26, 2009 by dandan (see edit history) Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 (edited) Rear Suspension Arms (working from top arm in a clockwise sense on attached image): 48770A ARM ASSY, UPPER CONTROL, REAR RH 48770‑19025 JZA80 1 $391.62 48790 ARM ASSY, UPPER CONTROL, REAR LH 48790‑19025 JZA80 1 $391.62 ___________________________________________________ 48730F ARM ASSY, REAR SUSPENSION, NO.2 RH 48730‑14030 JZA80 1 $253.78 48730‑14040 JZA80 1 $201.90 48740F ARM ASSY, REAR SUSPENSION, NO.2 LH 48740‑14060 JZA80 1 $253.78 48740‑14070 JZA80 1 $201.90 ___________________________________________________ 48780A ROD ASSY, STRUT, REAR 48780‑14030 JZA80 2 $133.61 48780‑14030 JZA80..GZ, RZ, RZS, SZR 2 $133.61 ___________________________________________________ 48720A ARM ASSY, REAR SUSPENSION, NO.1 LH 48710‑14110 JZA80 1 $144.20 48710A ARM ASSY, REAR SUSPENSION, NO.1 RH 48710‑14110 JZA80 1 $144.20 Edited March 26, 2009 by dandan (see edit history) Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 (edited) Rear Suspension Cam Adjusters bits for bottom arms (from left to right on attached image): 48194G CAM, REAR SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑22021 JZA80 1 $11.64 8198G CAM, REAR SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑22021 JZA80 1 $11.64 __________________________________________________________ 48198H CAM, CAMBER ADJUST, NO.2 48198‑14010 JZA80 4 $6.66 __________________________________________________________ 48198H CAM, CAMBER ADJUST, NO.2 48198‑14010 JZA80 4 $6.66 __________________________________________________________ 48194H CAM, REAR SUSPENSION CAMBER ADJUST, NO.2 RH 48190‑24030 JZA80 1 $12.76 48198R CAM, REAR SUSPENSION CAMBER ADJUST, NO.2 48190‑24030 JZA80 1 $12.76 Edited March 26, 2009 by dandan (see edit history) Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 Front Suspension Arms (top and bottom): 48610 ARM ASSY, FRONT SUSPENSION UPPER, RH 48610‑19025 JZA80 1 $392.05 48610‑29046 JZA80 1 $356.20 48630 ARM ASSY, FRONT SUSPENSION UPPER, LH 48630‑19025 JZA80 1 $392.05 48630‑29046 JZA80 1 $356.20 ___________________________________________________ 48068 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH 48068‑14080 JZA80 1 $359.51 48068‑14090 JZA80 1 $593.23 48069 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH 48069‑14080 JZA80 1 $359.51 48069‑14090 JZA80 1 $593.23 Quote Link to comment Share on other sites More sharing options...
dandan Posted March 26, 2009 Author Share Posted March 26, 2009 Front suspension cam adjusters (left to right on attached image): 48194D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 RH 48198‑24010 JZA80 2 $9.73 48198D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 LH 48198‑24010 JZA80 2 $9.73 ___________________________________________________________ 48194C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 48198C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 ___________________________________________________________ 48194C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 48198C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 ___________________________________________________________ 48194D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 RH 48198‑24010 JZA80 2 $9.73 48198D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 LH 48198‑24010 JZA80 2 $9.73 Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Pm me your model code and chassis number too and i will have a look and see if mine tie in with Homers. Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Rear Suspension Arms (working from top arm in a clockwise sense on attached image): 48770A ARM ASSY, UPPER CONTROL, REAR RH 48770‑19025 JZA80 1 $391.62 48790 ARM ASSY, UPPER CONTROL, REAR LH 48790‑19025 JZA80 1 $391.62 My info is based on a rz 6 speed from 07/96 The above numbers are fine ___________________________________________________ 48730F ARM ASSY, REAR SUSPENSION, NO.2 RH 48730‑14030 JZA80 1 $253.78 48730‑14040 JZA80 1 $201.90 - 96/05 onwards 48740F ARM ASSY, REAR SUSPENSION, NO.2 LH 48740‑14060 JZA80 1 $253.78 48740‑14070 JZA80 1 $201.90 - as above ___________________________________________________ 48780A ROD ASSY, STRUT, REAR 48780‑14030 JZA80 2 $133.61 48780‑14030 JZA80..GZ, RZ, RZS, SZR 2 $133.61 ___________________________________________________ 48720A ARM ASSY, REAR SUSPENSION, NO.1 LH 48710‑14110 JZA80 1 $144.20 48710A ARM ASSY, REAR SUSPENSION, NO.1 RH 48710‑14110 JZA80 1 $144.20 Numbers are fine Rear suspension arms When i check the EPC for revisions it states vins from 0035--- onwards. Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Rear Suspension Cam Adjusters bits for bottom arms (from left to right on attached image): 48194G CAM, REAR SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑22021 JZA80 1 $11.64 8198G CAM, REAR SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑22021 JZA80 1 $11.64 Number is fine __________________________________________________________ 48198H CAM, CAMBER ADJUST, NO.2 48198‑14010 JZA80 4 $6.66 FINE __________________________________________________________ 48198H CAM, CAMBER ADJUST, NO.2 48198‑14010 JZA80 4 $6.66 __________________________________________________________ 48194H CAM, REAR SUSPENSION CAMBER ADJUST, NO.2 RH 48190‑24030 JZA80 1 $12.76 48198R CAM, REAR SUSPENSION CAMBER ADJUST, NO.2 48190‑24030 JZA80 1 $12.76 Number is fine rear suspension cam adjusters Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Front Suspension Arms (top and bottom): 48610 ARM ASSY, FRONT SUSPENSION UPPER, RH 48610‑19025 JZA80 1 $392.05 48610‑29046 JZA80 1 $356.20 48630 ARM ASSY, FRONT SUSPENSION UPPER, LH 48630‑19025 JZA80 1 $392.05 48630‑29046 JZA80 1 $356.20 ___________________________________________________ 48068 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH 48068‑14080 JZA80 1 $359.51 48068‑14090 JZA80 1 $593.23 - unlucky 48069 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH 48069‑14080 JZA80 1 $359.51 48069‑14090 JZA80 1 $593.23 Front suspension arms I wonder what they did with the revision to increase the price by $200 ? Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Front suspension cam adjusters (left to right on attached image): 48194D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 RH 48198‑24010 JZA80 2 $9.73 48198D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 LH 48198‑24010 JZA80 2 $9.73 Number is fine ___________________________________________________________ 48194C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 48198C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 Numbers are fine ___________________________________________________________ 48194C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 RH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 48198C CAM, FRONT SUSPENSION CAMBER ADJUST, NO.1 LH 48190‑14040 JZA80; フロント 1 $16.67 48190‑24020 JZA80; リヤ 1 $16.17 Numbers are fine ___________________________________________________________ 48194D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 RH 48198‑24010 JZA80 2 $9.73 48198D CAM, FRONT SUSPENSION CAMBER ADJUST, NO.2 LH 48198‑24010 JZA80 2 $9.73 Numbers are fine Front suspension cam adjusters. Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 I'll try this in sections... All the images are from the online EPC and I've circled the necessary items in MS Paint The text extracts are a copy paste from the right hand side of the online EPC page (of the items that crop up when you highlight the circled part in the image) Steering: 45503A END SUB-ASSY, STEERING RACK NO.1 45503‑39095 JZA80 2 $134.46 45503‑59015 JZA80 2 $121.03 Thats it i think. Quote Link to comment Share on other sites More sharing options...
dandan Posted March 27, 2009 Author Share Posted March 27, 2009 Thanks Col - I really appreciate you going through that mate. I'm just cross referencing that with a fax from Steve Manley now to see how much it's all going to cost me!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 27, 2009 Share Posted March 27, 2009 Thanks Col - I really appreciate you going through that mate. I'm just cross referencing that with a fax from Steve Manley now to see how much it's all going to cost me!!!!!!!!!! No problem. I imagine over £1k plus fitting and alignment. But some spend more than that on bodykits and paint, i know which i would prefer Quote Link to comment Share on other sites More sharing options...
brettjones Posted March 27, 2009 Share Posted March 27, 2009 try paul whiffin for price aswell i got mine from him Quote Link to comment Share on other sites More sharing options...
ellis Posted April 13, 2015 Share Posted April 13, 2015 Bump - just for the part numbers! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.