Guest speeddy Posted March 11, 2009 Share Posted March 11, 2009 Is that anybode that could help me out with this: http://img3.imageshack.us/img3/4092/trdframskrm.th.jpg Im having a friend cut this out for me, but I need the size of it. Link to comment Share on other sites More sharing options...
RED_ROCKET Posted March 11, 2009 Share Posted March 11, 2009 i hope he gets its symeterical or it will look odd good luck Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted March 11, 2009 Share Posted March 11, 2009 Bit OT but other than letting water in, what's the point in TRD putting these in? is there something in there that benefits from being cooled or is it to do with letting pressure from the wheel well out or something? Link to comment Share on other sites More sharing options...
Luka-P Posted March 11, 2009 Share Posted March 11, 2009 i hope he gets its symeterical or it will look odd good luck When will you ever see both sides at the same time? Link to comment Share on other sites More sharing options...
RED_ROCKET Posted March 11, 2009 Share Posted March 11, 2009 these lot will spot it a mile off m8 Link to comment Share on other sites More sharing options...
RED_ROCKET Posted March 11, 2009 Share Posted March 11, 2009 out of interest whats he using to cut these out with Link to comment Share on other sites More sharing options...
j80leo Posted March 11, 2009 Share Posted March 11, 2009 out of interest whats he using to cut these out with An Axe:p Link to comment Share on other sites More sharing options...
Matt H Posted March 11, 2009 Share Posted March 11, 2009 They look gorg on that blue supra. And the wheels look like they are pretty tasty from that view too. Any chance anyone know the car? I'm presuming American with the qaulity of that pic though. Link to comment Share on other sites More sharing options...
Luka-P Posted March 11, 2009 Share Posted March 11, 2009 Do they have them on the 3000GTs? Link to comment Share on other sites More sharing options...
Guest speeddy Posted March 11, 2009 Share Posted March 11, 2009 I really dont know what he is using to cut it out. nobody that have it, that could measure it or something? Link to comment Share on other sites More sharing options...
johnd-mkiv Posted March 11, 2009 Share Posted March 11, 2009 I would make some up in cardboard then stick them on untill you get a size and shape your happy with then mark around the template, measure from the door and wing gap to the edge of the template top and bottom to make sure both straight edges are parallel to each other then measure down from the top of the wing to the staight edge to get both sides the same hight Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted March 11, 2009 Share Posted March 11, 2009 Forgot I was in Tech.. sorry. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now