marc_p Posted March 10, 2009 Share Posted March 10, 2009 Just wondering if anyone here has a picture of the HKS Hi-Power exhaust fitted to there car as mine doesn't sit right at all so I need to take the car along with a picture to the garage so they can bash/bend it back into place, here's a pic to show you what I mean: Link to comment Share on other sites More sharing options...
hoff Posted March 10, 2009 Share Posted March 10, 2009 Could just be a bracket come lose/broke mate. It should just sit in line and a cm (ish) below the arc. Link to comment Share on other sites More sharing options...
couv3z Posted March 10, 2009 Share Posted March 10, 2009 Is that a Toyato Proton in the back ground Link to comment Share on other sites More sharing options...
hoff Posted March 10, 2009 Share Posted March 10, 2009 How lazy are you mate? Parked as close to your door asa possible:d Link to comment Share on other sites More sharing options...
Al Massey Posted March 10, 2009 Share Posted March 10, 2009 here you go mate mines an N/A with an auto bahn 88 manifold and double decat if that makes a difference Link to comment Share on other sites More sharing options...
keener Posted March 10, 2009 Share Posted March 10, 2009 Mine Link to comment Share on other sites More sharing options...
marc_p Posted March 10, 2009 Author Share Posted March 10, 2009 Cheers for all the photos guys, much appreciated, I should be fine with them. Hoff - Brackets and everything is fine, just bent from hitting something underneath I think. Link to comment Share on other sites More sharing options...
TLicense Posted March 10, 2009 Share Posted March 10, 2009 There should be two rubber hangers that position it at the rear, the cowboy who fitted mine, which looked just like that, had only fitted one of them. Once I fitted the other it squared it up quite nicely. Link to comment Share on other sites More sharing options...
marc_p Posted March 10, 2009 Author Share Posted March 10, 2009 There should be two rubber hangers that position it at the rear, the cowboy who fitted mine, which looked just like that, had only fitted one of them. Once I fitted the other it squared it up quite nicely. Yup, there both there, but annoyingly squeking over every little bump. Link to comment Share on other sites More sharing options...
RobD Posted March 10, 2009 Share Posted March 10, 2009 I have that exhaust and mine tilts up at the back like the pictures above! Yours dont look right at all! Link to comment Share on other sites More sharing options...
ClaireRZ-S Posted March 10, 2009 Share Posted March 10, 2009 Dont know what exhaust i have but it looks the same as yours http://file042b.bebo.com/10/large/2008/10/16/21/355577624a9170450426l.jpg Link to comment Share on other sites More sharing options...
L18msy Posted March 10, 2009 Share Posted March 10, 2009 I have the same exhaust and it sits just like keeners pictures above Link to comment Share on other sites More sharing options...
Benjy Posted March 10, 2009 Share Posted March 10, 2009 Here's mine. Mine's tucked into the cut out perfectly. Until saturday when I fit my decats - and everything goes horribly f#cking wrong as it always does on my own car!! lol Link to comment Share on other sites More sharing options...
marc_p Posted March 10, 2009 Author Share Posted March 10, 2009 This is quite odd really, my exhaust has HKS Hi-Power on each side of the exhaust tip but my exit looks larger and stubbier than everyone elses apart from Clare's which looks like mine and sits like mine aswell Link to comment Share on other sites More sharing options...
supra_si Posted March 11, 2009 Share Posted March 11, 2009 have a look in my garage i have a hks hi power fitted on my TT Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now