TRD-Rob Posted February 25, 2009 Share Posted February 25, 2009 Hi Guys, Im looking at buying this from a fellow member and want to know your opinions on it? Im running hybrids and not looking for big power just yet so just want to know if its suitable, Thanks Link to comment Share on other sites More sharing options...
Chris and Alana Posted February 25, 2009 Share Posted February 25, 2009 I use one its fine. It's nice and small and has 4 pre sets, peak boost, real time boost and warning function which will try and reduce boost pressure if it reaches its pre set measure. As far as I know the solenoids can handle 2.5bar aswell. Should be upto the job of controlling most turbo charged vehicles. As for solenoid response I dont know how it compares to the more expensive units out there but it does use duel solenoids which from what I have read allows for quicker pulsing of the wastegate than a single solenoid unit. Link to comment Share on other sites More sharing options...
heckler Posted February 25, 2009 Share Posted February 25, 2009 I have the Blitz ID3 controller - it uses the same solenoid as spec-r cant fault it at all. Link to comment Share on other sites More sharing options...
edge Posted February 25, 2009 Share Posted February 25, 2009 I use one its fine. It's nice and small and has 4 pre sets, peak boost, real time boost and warning function which will try and reduce boost pressure if it reaches its pre set measure. As far as I know the solenoids can handle 2.5bar aswell. Should be upto the job of controlling most turbo charged vehicles. As for solenoid response I dont know how it compares to the more expensive units out there but it does use duel solenoids which from what I have read allows for quicker pulsing of the wastegate than a single solenoid unit. There are two types of solenid. Spec r and spec s - one can control boost to 1.3 bar? and the other to 2.5 bar. Cant remember what way round they are but check before you buy. And i have one aswel and its a nice little, simple to use bit of kit. Link to comment Share on other sites More sharing options...
Holden1989 Posted February 25, 2009 Share Posted February 25, 2009 he will only be looking to boost at 1.2bar so im assuming it will be ok? Link to comment Share on other sites More sharing options...
RobSheffield Posted February 25, 2009 Share Posted February 25, 2009 It controls boost, job done Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now