Paul Whiffin Posted April 29, 2011 Author Share Posted April 29, 2011 thats what im going with too- S362, VERY impressed Luc's talking about the Batmowheel version of the S362 mate. Link to comment Share on other sites More sharing options...
Luxluc Posted April 29, 2011 Share Posted April 29, 2011 Yep http://www.mkivsupra.net/vbb/showthread.php?129455-Supra-ECU-Register/page19&highlight=ecu+register see Leelbuck's Supra. Paul : do you know if he's running a stock intake or aftermarked, and what manif????? Link to comment Share on other sites More sharing options...
Tenttu Posted April 29, 2011 Share Posted April 29, 2011 (edited) Solved that yes, it was a damaged fuel filter. I ordered a new turbo for Steves car yesterday, went for an S366 Billet Batmowheel, I'm expecting more power and faster spool up, can't wait to find out, hopefully should get it fitted and mapped before the next round on the 14th May. Would be really nice to compare Holset HX50 Billet and S366 Batmo.. I was comparing my dyno plot and leelbuk, it seems that S362 spools slower than my HX50 O_o Could it be the cams that affects in the spool? Edited April 29, 2011 by Tenttu (see edit history) Link to comment Share on other sites More sharing options...
JamieP Posted April 29, 2011 Share Posted April 29, 2011 Yep http://www.mkivsupra.net/vbb/showthread.php?129455-Supra-ECU-Register/page19&highlight=ecu+register see Leelbuck's Supra. Paul : do you know if he's running a stock intake or aftermarked, and what manif????? Stock manifold. http://www.mkivsupra.net/vbb/showthread.php?244836-Supra-Mapped-S362-Batmowheel-6-Months-Work-Paid-Off! You just know you need a batmowheel now:D Link to comment Share on other sites More sharing options...
Luxluc Posted April 29, 2011 Share Posted April 29, 2011 What cam are you running Tenttu? Link to comment Share on other sites More sharing options...
Tenttu Posted April 29, 2011 Share Posted April 29, 2011 What cam are you running mate? I am running stock JDM cams. Link to comment Share on other sites More sharing options...
Luxluc Posted April 29, 2011 Share Posted April 29, 2011 You just know you need a batmowheel now:D Stop please Jamie ... let me first pass at TDi on Tuesday for a remap to 2 bar. Then, I can think about a new turbo Link to comment Share on other sites More sharing options...
Luxluc Posted April 29, 2011 Share Posted April 29, 2011 I am running stock JDM cams. The 264 will bring a couple of 100 rpm of lag vs JDM cams. Link to comment Share on other sites More sharing options...
Tenttu Posted April 29, 2011 Share Posted April 29, 2011 The 264 will bring a couple of 100 rpm of lag vs JDM cams. That what i was thinking but my turbo is 67mm and S362 is 62mm right? So the cams makes all the difference in the spool up time? Link to comment Share on other sites More sharing options...
Luxluc Posted April 29, 2011 Share Posted April 29, 2011 Spool depends on multiple factors like turbo caracteristics, cams, manifold, aso. It ain't that easy to compare 2 completely different setups. Link to comment Share on other sites More sharing options...
Tenttu Posted April 30, 2011 Share Posted April 30, 2011 Spool depends on multiple factors like turbo caracteristics, cams, manifold, aso. It ain't that easy to compare 2 completely different setups. Fair enough. I will make comparison with hx50mfs and s366 batmo at some point. Sorry for the OT! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted April 30, 2011 Share Posted April 30, 2011 Luc's talking about the Batmowheel version of the S362 mate. yeah so am i now paul, i think it might be worth paying that bit extra. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 30, 2011 Author Share Posted April 30, 2011 yeah so am i now paul, i think it might be worth paying that bit extra. That's the spirit, do it once do it properly is what I say. Link to comment Share on other sites More sharing options...
Wez Posted May 8, 2011 Share Posted May 8, 2011 Test fitted the Rota Boost alloys today, look better than I thought they would in white, unfortunately it was the only colour they had in stock. Also test fitted the Michelin slick tyres, these are straight off a Porsche Cup car. 9x18 front and 10x18 rear yar. How much did it cost for a set of those wheels and what size tyres do you use in both slick and road legal versions? Link to comment Share on other sites More sharing options...
supra joe Posted May 8, 2011 Share Posted May 8, 2011 good job on the build paul Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 9, 2011 Author Share Posted May 9, 2011 How much did it cost for a set of those wheels and what size tyres do you use in both slick and road legal versions? Hi Wez, I can do you a good price on them. PM me if your interested. We run 255/35 front and 295/30 rear R888 for intermediate and road use. Michelin Porsche cup slicks and wets, I'd have to check the sizes, dont know them off the top my head unfortunately. Ta Link to comment Share on other sites More sharing options...
SteveL Posted May 9, 2011 Share Posted May 9, 2011 Hi wez, the slicks and wets are : 24/64 and 27/68 - same as what the Carrrea Cup boys ran last year. Link to comment Share on other sites More sharing options...
Wez Posted May 9, 2011 Share Posted May 9, 2011 Hi Wez, I can do you a good price on them. PM me if your interested. We run 255/35 front and 295/30 rear R888 for intermediate and road use. Michelin Porsche cup slicks and wets, I'd have to check the sizes, dont know them off the top my head unfortunately. Ta Hi wez, the slicks and wets are : 24/64 and 27/68 - same as what the Carrrea Cup boys ran last year. Thanks for the info guys What offsets are you running on the Rota wheels and did you need to do any arch work? I am guessing a set of these part worns are far cheaper than running R888s as I want to get back on track a lot more this year but the cost of R888s or better is crazy money Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 9, 2011 Author Share Posted May 9, 2011 Thanks for the info guys What offsets are you running on the Rota wheels and did you need to do any arch work? I am guessing a set of these part worns are far cheaper than running R888s as I want to get back on track a lot more this year but the cost of R888s or better is crazy money They are +30 front and +35 rear, you'll need the rear arches rolled for definate. Slicks are much cheaper yeah. You should fit an acusump though, you don't want to be suffering from any oil starvation do you. They are pretty easy to fit and don't cost a lot either. Ta Link to comment Share on other sites More sharing options...
Wez Posted May 10, 2011 Share Posted May 10, 2011 They are +30 front and +35 rear, you'll need the rear arches rolled for definate. Slicks are much cheaper yeah. You should fit an acusump though, you don't want to be suffering from any oil starvation do you. They are pretty easy to fit and don't cost a lot either. Ta Thanks Paul, I sent you PM regarding the wheels So how does the acusump plumb in and which size did you go for? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 10, 2011 Author Share Posted May 10, 2011 Thanks Paul, I sent you PM regarding the wheels So how does the acusump plumb in and which size did you go for? The largest tank. Some pics of it fitted here. We used the back turbo oil feed for the oil supply to it, its very easy to install as long as you have room for it. I can supply all the bits if needed of course. Link to comment Share on other sites More sharing options...
Wez Posted May 10, 2011 Share Posted May 10, 2011 The largest tank. Some pics of it fitted here. We used the back turbo oil feed for the oil supply to it, its very easy to install as long as you have room for it. I can supply all the bits if needed of course. Ahh yes I see where the feed is going now. The largest being 6 pints, does that then mean you have an additional 6 pints of oil in the system which is need to fill the Accusump? How much would you sell a complete Accusump kit for and what would be included? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 10, 2011 Author Share Posted May 10, 2011 Ahh yes I see where the feed is going now. The largest being 6 pints, does that then mean you have an additional 6 pints of oil in the system which is need to fill the Accusump? How much would you sell a complete Accusump kit for and what would be included? 6 pints extra yes. Emaill me at [email protected] and I'll give you all the prices mate. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 11, 2011 Author Share Posted May 11, 2011 Some update for you. Steve didn't quite like the Cobra Sebring Pro's so we fitted a pair of Cobra Evolution Pro seats instead, pics below. These are much nicer fit, lower down and not as wide either. http://garagewhifbitz.co.uk/images/stories/gw_images/forum pics/cobraevolutionseats.jpg http://garagewhifbitz.co.uk/images/stories/gw_images/forum pics/cobraevolutionseats2.jpg Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 11, 2011 Author Share Posted May 11, 2011 And we found the problem with the spongy brake pedal. The caliper piston seals were melted! They've done pretty well though as the calipers haven't had a rebuild since new and they've had about 6 years of track abuse. While we were at it we thought it would be a good idea to upgrade the caliper pistons from alluminium to stainless steel for less heat transfer through the piston into the brake fluid. All rebuilt, back on the car now and bled up with Motul RBF660 brake fluid as per normal. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now