Jump to content
The mkiv Supra Owners Club

Danno's Supra Build


DannoSupra

Recommended Posts

  • 1 month later...
  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...

Yup i've had the time to do some work on the old girl :) i NEED to get her up and running in the next few months!

 

Fitted the HKS Oil Filter Relocator and Aux Belt

image

image

image

image

 

But then had to move it due to the sheer size of these Kenlowe's :)

image

 

So the pipes that i'de cut for the Engine to Filter were perfect size from Filter to Cooler :) So mocked up the Cooler position after removing the washer bottle. They will be well out of the way of the AntiRoll bar as soon as they're secured to chassis leg

image

image

 

Then had the pleasure of repositioning the fusebox. So after removing the ABS, the fusebox, PAS Resevoir and Fuel Pressure Reg can go nicelly out of the way in that corner. Also been given a battery cable off a 1 Series in work that was going to scrap. That will get used as a battery to boot conversion. So used a grommet under ABS unit and ran under the Car to the boot

image

image

image

image

image

image

image

Link to comment
Share on other sites

Removed all the bits i had stored inside the car, ready for some sound proofing. Any tips what products to use?

 

image

image

image

image

image

 

Tomorrows job - Engine Managment loom :)

 

image

 

Dusty mess

 

image

image

 

I've also removed the Discs, Pads, Callipers and Flexi's. Have new Discs, Pads and Goodrich Lines, and the Callipers will be painted Black

Link to comment
Share on other sites

  • 3 weeks later...

Engine loom has more work than i thought, i'm working through it slowly. Just waiting for my new injectors to come this week and i can crack on

 

Also started doing the sound deadning. £100's worth of sound proofing sheets and i may need more :O

 

She now has new brakes all round. OEM Discs and Portfield Racing Pads

 

Been busy making 1 piece intercooler pipes and making a mid section

 

Whifbitz 4" Stainless System

image

 

Exhaust Manifold, Turbo, Downpipe, Wastegate and Screamer is on too :)

image

image

image

 

PHR Lower water neck adapter

image

 

Been prepping the bodywork where the kit was ready for paint very soon, test fitted rear bumper and trims

image

image

 

Redone the Oil Filter Relocator :) i've got some square section to make a bracket instead of the old a/c unit bracket

image

Edited by DannoSupra (see edit history)
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...

Well she turns over and oil pressure light goes out, no leaks on cranking :)

 

But she wont fire up :( no spark no fuel pump prime. I've got Jamie's old PnP Loom, and ive tried my best to match my new sensors to what it had wired up previously. I'm going to tidy up to ecu connector and start again

 

No pics im afraid

 

BUT A MASSIVE UPDATE (it is for me anyway :))

Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...

Bit of an update on the poor thing! She's going back in the bodyshop soon, i've decided to go back to Astral Black! No kit, just lip and possibly keep the TRD Wing. Havnt had time or money to do any more work on it recently, due to house purchase and busy in work! But hopefully 2015 will be a good year :thumbs:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.