DannoSupra Posted November 3, 2012 Author Share Posted November 3, 2012 (edited) Got a nice collection starting Bit of an update - Managed to fit two new fuel lines, refit the tank with the Twin Pump setup. Got the rear subframe back on, wheels on and back on the floor Can do a bit of interior work now Few Pics Edited November 3, 2012 by DannoSupra (see edit history) Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted November 4, 2012 Author Share Posted November 4, 2012 Bit more work done today I dusted the body and gave her a polish Got a list of interior panels and parts needed Sorted a bit of the interior wiring, binned the SRS, fitted the clutch pedal and slave, manual brake pedal, refit the heaterbox and dashboard No piccies really sorry guys, i'll be going back this week somepoint to get some snaps. The lights in the unit is poor for pics, will need daylight! Quote Link to comment Share on other sites More sharing options...
DaveR Posted November 4, 2012 Share Posted November 4, 2012 Luuuurve those fuel lines! There's nothing quite like a nice braided hose... Quote Link to comment Share on other sites More sharing options...
Guest Beastmode Posted November 20, 2012 Share Posted November 20, 2012 amazing, keep going. Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted March 15, 2013 Author Share Posted March 15, 2013 Major updates coming very soon Just a quick question to anyone who's done a auto - 6spd conversion. What gearbox mount crossmember do i need to use, auto or manual one? Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted April 16, 2013 Author Share Posted April 16, 2013 Progress - i spent an hour or two tonight, started building the shortblock JamieP's Forged Block, cleaned up and fitted new headgasket Whifbitz Stage 4 (inc 1mm oversize valves) head fitted with L19 ARP Studs New Exhaust Studs and i couldn't resist a test fit - along with a set of 280 Cams .... hopefully towards the end of the week i'de have sorted the timing covers, cam and crank pulleys, timing belt, water pump etc Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted July 26, 2013 Author Share Posted July 26, 2013 (edited) Engine is ready to go in, this weekend possibly. Also trying a different colour scheme with the cam covers with some textured paint then Satin Black on top Few piccies Edited July 27, 2013 by DannoSupra (see edit history) Quote Link to comment Share on other sites More sharing options...
listy Posted July 26, 2013 Share Posted July 26, 2013 That's looking gorgeous Quote Link to comment Share on other sites More sharing options...
Guest aspire Posted July 27, 2013 Share Posted July 27, 2013 nice build Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 27, 2013 Share Posted July 27, 2013 Very nice work. Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted July 28, 2013 Author Share Posted July 28, 2013 Engines' in An image i havnt seen for 5years Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 1, 2013 Author Share Posted August 1, 2013 Just been mocking up bits n bobs tonight Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 3, 2013 Author Share Posted August 3, 2013 6spd conversion now complete with RPS Carbon Carbon Twin Plate installed, only pic i took today, will get more tmoz Quote Link to comment Share on other sites More sharing options...
thetrashcanman Posted August 13, 2013 Share Posted August 13, 2013 Awesome project this mate, only just seen it, good work keep it up Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 13, 2013 Author Share Posted August 13, 2013 Cheers bud Just waiting on a few parts and i shall update Quote Link to comment Share on other sites More sharing options...
Kev.O Posted August 15, 2013 Share Posted August 15, 2013 Coming along nicely Quote Link to comment Share on other sites More sharing options...
xm 1 Posted August 16, 2013 Share Posted August 16, 2013 looking goog! where did you get those cf front engine covers from?? Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 16, 2013 Author Share Posted August 16, 2013 Cheers chaps All my Carbon is from Whifbitz. Top notch Quote Link to comment Share on other sites More sharing options...
xm 1 Posted August 16, 2013 Share Posted August 16, 2013 ok cool! thx for the info do you know if these will fit NA engines too??? Quote Link to comment Share on other sites More sharing options...
Guest integrale8v Posted August 21, 2013 Share Posted August 21, 2013 Subscribed Quote Link to comment Share on other sites More sharing options...
fastnfurious Posted December 18, 2013 Share Posted December 18, 2013 WOW! really awesome transformation project... love it! Quote Link to comment Share on other sites More sharing options...
markssupra Posted December 18, 2013 Share Posted December 18, 2013 Wow, awesome project, dont know how I missed this. Just read the whole thread. I can appreciate how much time and effort has gone into this so far. Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted December 29, 2013 Author Share Posted December 29, 2013 Cheers chaps Haven't been working on her for the past few months. Been over today to gather my head a list up few bits n bobs I still need I'm thinking of ABS delete, and use that corner for PAS Tank, FuseBox, Fuel Reg etc. I have to relocate PAS Tank and FuseBox due to inlet anyhow Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted December 31, 2013 Author Share Posted December 31, 2013 ABS and Taction has now been removed! Going to replace with Cupro Nickel and add an Electronic LineLock Then need to cut the look back and do some tucking Two Questions: Does anyone know what size and thread unions i need so i can get some bought up ready for when i start doing the pipes? Am i right in thinking Non ABS Supra's have got 3 outlets on the master cylinder? Thanks in advance Pics: Quote Link to comment Share on other sites More sharing options...
Parry_10 Posted January 1, 2014 Share Posted January 1, 2014 Looking good mate, drop Lee P a pm about the line lock as he fitted the one on my car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.