Paul Whiffin Posted January 15, 2009 Share Posted January 15, 2009 I've got this full race cylinder head available which came off my own car, made 850bhp on 1.6 bar boost. Similar spec to what Steve L has on his car which combined with HKS cams gave an extra 50bhp over stock head/cams. Has a superficial damage where a piston let go, since then it has been fully rebuilt with valves relapped and new guide seals fitted. Bronze guides and valves have done about 1000 miles, its also been skimmed so ready to bolt straight on. Spec is fully ported/flowed, Ferrea 1mm oversize valves, brand new Supertech double valve springs/retainers/locators, brand new Ferrea valve guide seals, Ferrea bronze valve guides. Parts alone to build a head like would be about £800 approx. Then you have the cost of porting, skimming, shimming, etc. Looking for £1400. Ta Link to comment Share on other sites More sharing options...
Paul Whiffin Posted January 17, 2009 Author Share Posted January 17, 2009 Deposit taken Link to comment Share on other sites More sharing options...
Recommended Posts