T2 MSW Posted January 14, 2009 Share Posted January 14, 2009 How did you get the bushes out of the main lower arm, when I looked at doing this a grange put over 300 tons of presure on it and all it did was bend the arm?? Quote Link to comment Share on other sites More sharing options...
miko_supra Posted January 14, 2009 Author Share Posted January 14, 2009 How did you get the bushes out of the main lower arm, when I looked at doing this a grange put over 300 tons of presure on it and all it did was bend the arm?? never had that much difficulty getting the bushes out. They have a lip so it helps to carefully remove that. Or you can drill down the rubber parts to help free it up, or if all else fails burn them out. Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted January 14, 2009 Share Posted January 14, 2009 Burn them out, there's always an excuse to start a fire Then take a hacksaw and cut the outer coller off. VOILA! Thats the way i'll be doing, and always have, only because our press is a bit old and dodgy! hehehe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.