dandan Posted December 29, 2008 Share Posted December 29, 2008 I have the following parts which I am either going to sell or return (at a loss). Please let me know if you are interested. Everything is brand new and never fitted: 1x 809112 #12AN Forged 90 degree swivel fitting 3x 800112 #12AN Straight swivel fittings 1x 925112 #12AN Male/Male/Female swivel fitting 1x 804612 #12AN 45 degree swivel fitting 2x 997114 #12AN Aluminium weld on fittings Approx 12ft of #12AN Autoflex stainless braided hose I bought all these parts a while ago for my breather setup but have had a change of plans and am going for something a little different. These parts give you everything you need to go from each cam cover all the way to your catch can or turbo intake in genuine Earl's #12AN fittings and hose. All fitting are the swivel type which means the hose can be rotated relative to the fitting once assembled (makes installation much much easier) and this is something a lot of the cheaper Aeroquip/Moquip style ones do not do. I have attached one of Paul Whiffin's pictures below as this shows the same fittings and the hose size. I've also attached a screenshot from Earl's.co.uk which shows all this stuff excluding the male/male/female tee (which is the most expensive fitting by far) and the aluminium weld on items. As you can see it is already at £295 and excludes the Tee, the two weld ons and shipping. Most people know this stuff is very pricey so I don't plan to take a massive hit on what I paid. Also this is all assembled except the the 45 degree fitting. Depending on if you connect to a catch tank or the intake will depend what length the hose needs to be for that fitting. I could cut it to length and assemble if absolutely necessary. I am looking for offers over £190 for all this and will probably wait a week or so to see what interest I get and go from there. Cheers Dan ps I also have two #10AN straight swivel fittings and #10 Autoflex hose which I could sell as well if needed. Link to comment Share on other sites More sharing options...
supradibbs Posted December 29, 2008 Share Posted December 29, 2008 Very good price that not cheap stuff Link to comment Share on other sites More sharing options...
T2 MSW Posted December 29, 2008 Share Posted December 29, 2008 Very intrested PM'ed an offer Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 29, 2008 Share Posted December 29, 2008 If you get stuck with this I'd give £150 and have them picked up at my cost. No immediate use, but i get through a fair few of these things. Link to comment Share on other sites More sharing options...
dandan Posted December 29, 2008 Author Share Posted December 29, 2008 Thanks for the offer Chris but I've had a few pm's already so I expect them to shift no problem at this price. M5WTT - I'll pm you back later, thank you for the pm and offer. Do you intend to go to the intake or a catch can? I have the real parts in my living room now so will get a pic or two up tomorrow of the actual parts as a couple of people have asked to see the actual items. Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted December 29, 2008 Share Posted December 29, 2008 Very good price that not cheap stuff Have you gone all Japanese on us Wayne:d Link to comment Share on other sites More sharing options...
T2 MSW Posted December 29, 2008 Share Posted December 29, 2008 Thanks for the offer Chris but I've had a few pm's already so I expect them to shift no problem at this price. M5WTT - I'll pm you back later, thank you for the pm and offer. Do you intend to go to the intake or a catch can? I have the real parts in my living room now so will get a pic or two up tomorrow of the actual parts as a couple of people have asked to see the actual items. Cheers, planning on going to a catch can Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 29, 2008 Share Posted December 29, 2008 No worries, will stand on the offer until tomorrow midday. Link to comment Share on other sites More sharing options...
dandan Posted December 30, 2008 Author Share Posted December 30, 2008 Ok for those who asked...I've updated the first post with a few photos of the real parts and my old loving room carpet! I was slightly off in my initial description - I've actually assembled this with a 45 degree off the Tee on the exhaust side to help go over (or under) the turbo intake pipe. The other end of this has the 90 degree fitting on. I also have some a couple of other bits that may be of interest as shown in the photos of this post: 1) 1x #12 swivel on approximately 250mm of #12 Autoflex hose 2) 2x #10 blue Econofit clamps. They are Earl's posh version of jubilee clips that have anodized covers over the top. 3) 2x #10 straight swivels on approx 3ft of Autoflex hose (shown in the photo with the catch can) 4) 2x #12 blue Econofit clamps (also shown in last photo, loosely assembled on end of the #10 oses towards the top right of the photo) Link to comment Share on other sites More sharing options...
dandan Posted January 2, 2009 Author Share Posted January 2, 2009 Sold to M5W TT pending payment. Link to comment Share on other sites More sharing options...
Guest suprabass Posted January 13, 2009 Share Posted January 13, 2009 was this sold ??? Link to comment Share on other sites More sharing options...
dandan Posted January 13, 2009 Author Share Posted January 13, 2009 Yes - now sold. Link to comment Share on other sites More sharing options...
Recommended Posts