hodge Posted December 26, 2008 Share Posted December 26, 2008 I need 6 of the above for a breather kit but can't seem to get hold of any alloy ones. Has anyone got any or point me to a webside please. Many thanks in advance. All the best. Link to comment Share on other sites More sharing options...
RobSheffield Posted December 26, 2008 Share Posted December 26, 2008 Have you tried Thinkauto? Link to comment Share on other sites More sharing options...
hodge Posted December 26, 2008 Author Share Posted December 26, 2008 Cheers rob. I've tried the website but they've got no picys so don't know if I'm buying the right stuff. Link to comment Share on other sites More sharing options...
RobSheffield Posted December 26, 2008 Share Posted December 26, 2008 Thats who most people use. There are a couple of alternatives, but beware cheap fittings, they really aint good! Link to comment Share on other sites More sharing options...
Steve Posted December 26, 2008 Share Posted December 26, 2008 There are some pictures if you download the catalogue (there used to be anyway) Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 26, 2008 Share Posted December 26, 2008 They will be about 25 quid each, plus VAT and postage. I have some in stock, but not six. I can get more for next day, in the New Year. If you use push on hose, rather than braided, the hose and fittings are cheaper. Link to comment Share on other sites More sharing options...
hodge Posted December 27, 2008 Author Share Posted December 27, 2008 all sorted cheers guys. Got them from speedflow. Thanks for all the help. All the best. Link to comment Share on other sites More sharing options...
dandan Posted December 27, 2008 Share Posted December 27, 2008 Bad timing....I have the whole lot (90 degree low profile for inlet side, male/male/female Tee for exhaust side, 2x straight and 1 x45 degree (to go to your catch can or inlet pipe) plus a spare 90 degree fitting as well. All assembled -12 Earls with 2x aluminium weld on fittings as well and stainless braided hose........was going to put a for sale thread on tomorrow!!! Attached pic is one of Paul Whiffin's....what I have is the same but with either a 45 or a 90 to enter the catch can (or intake tube). Link to comment Share on other sites More sharing options...
Recommended Posts