harley-jm Posted December 12, 2008 Share Posted December 12, 2008 I'm mounting up a FMIC and seem to recall that their is an optimum gap to leave beween the FMIC and rad but cant remember what it is? Did a search without luck. HELP!! cheers Paul Link to comment Share on other sites More sharing options...
csa Posted December 12, 2008 Share Posted December 12, 2008 as close as possible is my guess. To avoid any air slipping out the sides, top and bottom. but let's hear the experts as well... Link to comment Share on other sites More sharing options...
paul mac Posted December 12, 2008 Share Posted December 12, 2008 you do want a low pressure area behind the intercooler but i do not think there would be an optimum distance to promote this, to close and the main radiator would radiate heat to the intercooler (bad), the main thing is to make sure you seal the gap between the front bumper and the intercooler and the gap between the intercooler and the radiator, if you dont think this is important just have a look at the pains Mr T takes to seal the stock intercooler and main engine radiator Link to comment Share on other sites More sharing options...
Alex Posted December 12, 2008 Share Posted December 12, 2008 you do want a low pressure area behind the intercooler but i do not think there would be an optimum distance to promote this, to close and the main radiator would radiate heat to the intercooler (bad), the main thing is to make sure you seal the gap between the front bumper and the intercooler and the gap between the intercooler and the radiator, if you dont think this is important just have a look at the pains Mr T takes to seal the stock intercooler and main engine radiator Ideally they wouldn't be infront of one another. Latent heat from one heating the air that's supposed to exchange over the other isn't good. I'd say a 10-20cm gap is what you're after in this compromised setup, and as has been said you need to make sure the air that enters the mouth of the engine bay has no way to escape except through the intercooler and then through the radiator. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted December 12, 2008 Share Posted December 12, 2008 Ideally they wouldn't be infront of one another. Latent heat from one heating the air that's supposed to exchange over the other isn't good. Thats why V mounts work so well, I was thinking about doing one on one of our Supra track cars. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now