Jellybean Posted November 18, 2008 Share Posted November 18, 2008 How do you measure what Hub Centric Ring will fit? http://www.nengun.com/kics/hub-centric-ring Theres loads Link to comment Share on other sites More sharing options...
merckx Posted November 18, 2008 Share Posted November 18, 2008 (edited) It looks like those ones are only used when installing the Kics wheel spacers. Compatible with the Kics wheel spacers only For normal hub centric rings you'll need: The hub diameter on the Supra is 60.1 (inside diameter) Outside dameter is what you'll need to fit your particular wheel. Like these. Aluminium rather than plastic will be better but they aren't always available. Edited November 19, 2008 by merckx (see edit history) Link to comment Share on other sites More sharing options...
Jellybean Posted November 19, 2008 Author Share Posted November 19, 2008 (edited) Thsi is what I got Wheels Volk Racing GT-C Face 2 Wheels 5X114.3 19X10.5J ET+37 (73mm) Volk Racing GT-C Face 2 Wheels 5X114.3 19X9.5J ET+24 (73mm) Spacers Project Kics Wide Tread Wheel Spacers 25mm / 5 X 114.3mm Project Kics Wide Tread Wheel Spacers 10mm / 5 X 114.3mm I presume Diameter: 60mm - Thickness: 15mm; 60mm diameter refers to inside diameter. Whats the Thickness all about? Edited November 19, 2008 by Jellybean (see edit history) Link to comment Share on other sites More sharing options...
Dnk Posted November 19, 2008 Share Posted November 19, 2008 If you cant buy them off the shelf get a decent engineering company to make them, take a wheel with you then they'll be able to measure the outer diameter required to fit your rims I made my own and its not difficult if youve got a bar of decent aluminium alloy and a lathe Link to comment Share on other sites More sharing options...
Jellybean Posted November 19, 2008 Author Share Posted November 19, 2008 If you cant buy them off the shelf get a decent engineering company to make them, take a wheel with you then they'll be able to measure the outer diameter required to fit your rims I made my own and its not difficult if youve got a bar of decent aluminium alloy and a lathe Project Kics does them but the Diameter available only goes to max 64MM so I resume they are quoting the inside diameter Might just get some and see if they fit :rolleyes:but not too sure about the Thickness Link to comment Share on other sites More sharing options...
Jellybean Posted November 19, 2008 Author Share Posted November 19, 2008 Project Kics does them but the Diameter available only goes to max 64MM so I resume they are quoting the inside diameter Might just get some and see if they fit :rolleyes:but not too sure about the Thickness I think Nengun have it translated incorrectly by Thickness they mean length Link to comment Share on other sites More sharing options...
Dnk Posted November 19, 2008 Share Posted November 19, 2008 Project Kics does them but the Diameter available only goes to max 64MM so I resume they are quoting the inside diameter Might just get some and see if they fit :rolleyes:but not too sure about the Thickness If the mkiv spigot on the hub is 60.10 mm and the project Kics only go to 64.00 mm then they'd only have a 1.45 mm wall thickness which i'd doubt to be honest. The ones on my Work Equips needed a much bigger wall thickness, at least 5.00 mm so mine are nearer to 70.00 mm outer diameter. Most wheels will vary though so they definetly need to be measured. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now