agent.chaos Posted November 7, 2008 Share Posted November 7, 2008 I just got back from getting the tranny fluid changed. Just when they were about to put in the fluid, the guy comes up and says "There's a red sticker on the cap that says use automatic fluids only...". We were both kinda confused, but still went ahead with the manual fluid instead. Does anyone else had this too? Mine is a J-Spec btw. Link to comment Share on other sites More sharing options...
Scott Posted November 7, 2008 Share Posted November 7, 2008 6spd uses ATF buddy. As far as i know everyone uses automatic fluid. You have to be very careful with what oil you put in too so if i were you i would be getting the proper stuff and having it changed before u start rotting through seals. Link to comment Share on other sites More sharing options...
agent.chaos Posted November 7, 2008 Author Share Posted November 7, 2008 I went to the Toyota service shop and asked for the V160 Fluid, since I read that it is the only fluid approved for use. But they said that they do not carry those anymore, and instead they printed out the fluid data specifications for me. It listed 'API GL-5 SAE 75W-90', so I followed exactly what it says. Should I go back and replace it back with the ATF? Link to comment Share on other sites More sharing options...
Nic Posted November 7, 2008 Share Posted November 7, 2008 I went to the Toyota service shop and asked for the V160 Fluid, since I read that it is the only fluid approved for use. But they said that they do not carry those anymore, and instead they printed out the fluid data specifications for me. It listed 'API GL-5 SAE 75W-90', so I followed exactly what it says. Should I go back and replace it back with the ATF? I can still get the V160 oil if needed. Link to comment Share on other sites More sharing options...
agent.chaos Posted November 7, 2008 Author Share Posted November 7, 2008 Thanks, but I really want to know bout this issue, whether the oil info that Toyota gave me is correct or not. Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 7, 2008 Share Posted November 7, 2008 V160 is based on auto box fluid. Thousands of modern cars have manual boxes that run ATF in them, its low viscosity aids MPG. Whether it's the best oil in a transmission that's being overloaded by a lot more torque than it was designed for though is a moot point. Link to comment Share on other sites More sharing options...
adnanshah247 Posted November 7, 2008 Share Posted November 7, 2008 I can still get the V160 oil if needed. how much bud? my fluid needs changing! Link to comment Share on other sites More sharing options...
newbiematt Posted November 7, 2008 Share Posted November 7, 2008 6spd uses ATF buddy. As far as i know everyone uses automatic fluid. You have to be very careful with what oil you put in too so if i were you i would be getting the proper stuff and having it changed before u start rotting through seals. Would this happen if using MTF rather than ATF? I'm worried as I have changed mine with MTF! Link to comment Share on other sites More sharing options...
Scott Posted November 7, 2008 Share Posted November 7, 2008 Would this happen if using MTF rather than ATF? I'm worried as I have changed mine with MTF! Can't be sure, the horror stories on here made me use ATF though lol Link to comment Share on other sites More sharing options...
agent.chaos Posted November 7, 2008 Author Share Posted November 7, 2008 ...And I wasted time and money to change it to MTF. Have to go back and change it to ATF since the majority are doing so... Thanks guys Link to comment Share on other sites More sharing options...
agent.chaos Posted November 9, 2008 Author Share Posted November 9, 2008 I was suggested with the Valvoline ATF DX3 for the tranny. Does anyone know how this oil is? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now