Rob_B Posted September 2, 2002 Share Posted September 2, 2002 Hi Guys.. I almost forgot about this problem until it happened the other day... Every now and then when I give the Supe some serious welly I notice that the overdrive light flashes. I remember that this is some kind of diagnostic code so i noted the sequence... flash - 2 second delay - flash - 2 second delay, and so on, etc etc etc. Any of you guys know what this means ?? Rgds, Rob. Link to comment Share on other sites More sharing options...
Alex Posted September 2, 2002 Share Posted September 2, 2002 The self destruct sequence....bit of a problem on the early models... Sorry I'm just being silly..... Link to comment Share on other sites More sharing options...
Rob_B Posted September 2, 2002 Author Share Posted September 2, 2002 hehe.. Oh no.. Not the dreaded self destruct.. waaa Rgds, Rob. Link to comment Share on other sites More sharing options...
eyefi Posted September 3, 2002 Share Posted September 3, 2002 i think its something to do with overheating atf. does it do it when u use manual mode? its not a diagnostic as such (unless u have shorted the diagnostic pins) its a warning Link to comment Share on other sites More sharing options...
Gaz Walker Posted September 3, 2002 Share Posted September 3, 2002 Originally posted by Rob_B Hi Guys.. I almost forgot about this problem until it happened the other day... Every now and then when I give the Supe some serious welly I notice that the overdrive light flashes. I remember that this is some kind of diagnostic code so i noted the sequence... flash - 2 second delay - flash - 2 second delay, and so on, etc etc etc. Any of you guys know what this means ?? Rgds, Rob. Rob, I got that last week sometime. Only happened once. Couldn't find a code for it in the manual tho??? That was on the same morning as the flat tyre and when the alarm locked me out!!! Gaz. Link to comment Share on other sites More sharing options...
Rob_B Posted September 3, 2002 Author Share Posted September 3, 2002 Originally posted by gazwalker Rob, I got that last week sometime. Only happened once. Couldn't find a code for it in the manual tho??? That was on the same morning as the flat tyre and when the alarm locked me out!!! Gaz. Well along as the old 'Things happen in threes' is true, you shouldnt be expecting any other things to go wrong just yet Rgds, Rob. Link to comment Share on other sites More sharing options...
Rob_B Posted September 3, 2002 Author Share Posted September 3, 2002 Originally posted by eyefi i think its something to do with overheating atf. does it do it when u use manual mode? its not a diagnostic as such (unless u have shorted the diagnostic pins) its a warning eyefi, Not sure if it happens in manual mode, I'll try it on the way home from work and let you know I haven't shorted the the diagnostic pins so I am guessing that it probably is overheating. Thanks for the advice... Rgds, Rob. Link to comment Share on other sites More sharing options...
Gaz Walker Posted September 3, 2002 Share Posted September 3, 2002 Originally posted by Rob_B eyefi, Not sure if it happens in manual mode, I'll try it on the way home from work and let you know I haven't shorted the the diagnostic pins so I am guessing that it probably is overheating. Thanks for the advice... Rgds, Rob. When I happened in mine I was in Auto mode, only set of 2 mins previously, wasn't giving it any grief at all... Gaz. Link to comment Share on other sites More sharing options...
mrboost Posted September 3, 2002 Share Posted September 3, 2002 mine was doing that. It turned out to be a wire behind the mileometer the blue silver and red one that was pinched inbetween the dash. Martin Link to comment Share on other sites More sharing options...
mark brown Posted September 3, 2002 Share Posted September 3, 2002 This fault is usually caused by speedo conversion problems, faulty converter or broken wiring. Mark Brown Link to comment Share on other sites More sharing options...
Rob_B Posted September 4, 2002 Author Share Posted September 4, 2002 Hasn't had the conversion done yet... I'll check behind the dash though and make sure everything looks ok.. Hi Mark... Another Dartford guy on the BBS .. Rgds, Rob. Link to comment Share on other sites More sharing options...
HedgehogSandwich adi Posted September 4, 2002 Share Posted September 4, 2002 Its the gearbox ECU telling you theres a fault..if you know how to get the codes you can see what it means. try http://www.mkiv.com . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now