Lukeyboy2k Posted October 30, 2008 Share Posted October 30, 2008 I have for sale my ARC Titanium complete exhaust system. This replaces both cats and the cat-back exhaust (i.e. if you want to go BPU you don't need to purchase any decat pipes). This system retailed for over £1300 when new and is no longer available. It comes in three sections, all made from titanium and is very, very light. I weighed all three parts together and it came to 9.8kg! There is a slight narrowing so a restrictor ring shouldn't be needed. In my opinion the condition of the entire system is very good. There are a few scrapes here and there, and additional plates have been welded to the underneath of the back box to give more protection against grounding. If your car is not lowered, then you shouldn't have much trouble with grounding unless the speed bumps are particularly nasty. It sounds deep though not too offensive at idle, but aggressive under WOT. If you are stock and looking to go BPU this is a very cost effective and "bling" solution. I'm asking for £360 delivered. I'll try to answer any questions you may have. http://img517.imageshack.us/img517/1/cimg0034mx5.jpg http://img517.imageshack.us/img517/cimg0034mx5.jpg/1/w320.png http://img517.imageshack.us/img517/4994/cimg0026lz9.jpg http://img517.imageshack.us/img517/cimg0026lz9.jpg/1/w320.png http://img517.imageshack.us/img517/5422/cimg0019qk1.jpg http://img517.imageshack.us/img517/cimg0019qk1.jpg/1/w320.png Link to comment Share on other sites More sharing options...
Beefyblx Posted October 30, 2008 Share Posted October 30, 2008 Have you got any pics fitted to the supra pal? Link to comment Share on other sites More sharing options...
Muffleman Posted October 30, 2008 Share Posted October 30, 2008 I'll take a pic of it on the car tomorrow Link to comment Share on other sites More sharing options...
gordy07 Posted October 30, 2008 Share Posted October 30, 2008 That looks tasty! Link to comment Share on other sites More sharing options...
hadyn Posted October 30, 2008 Share Posted October 30, 2008 Yep looks well beefy. I presume the system removes the 2nd cat too? Link to comment Share on other sites More sharing options...
Scott Posted October 30, 2008 Share Posted October 30, 2008 Yep looks well beefy. I presume the system removes the 2nd cat too? ?? lol This replaces both cats and the cat-back exhaust Link to comment Share on other sites More sharing options...
hadyn Posted October 30, 2008 Share Posted October 30, 2008 Sorry for being a dumbass! lol Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted October 31, 2008 Author Share Posted October 31, 2008 Have you got any pics fitted to the supra pal? Will have soon hopefully. I'll take a pic of it on the car tomorrow Nice one - thanks mate. That looks tasty! It is. I think you should buy it. Sorry for being a dumbass! lol Link to comment Share on other sites More sharing options...
gordy07 Posted November 1, 2008 Share Posted November 1, 2008 No bother mate il buy it,for £200;) lol Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted November 7, 2008 Author Share Posted November 7, 2008 Bump. Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted January 24, 2009 Author Share Posted January 24, 2009 Time to bump this. I had interest from a few people via PM, and it was provisionally sold, but it was a long time ago and I've lost the PMs. Sorry to anyone whose PM I've lost. I've noticed a small hole on the back box section - this will probably need a weld. So, back up for sale at the new lower price of £360 delivered to mainland UK. Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted February 1, 2009 Author Share Posted February 1, 2009 Back to the top. Link to comment Share on other sites More sharing options...
Rich Posted February 1, 2009 Share Posted February 1, 2009 Will this be ok for a single turbo car? What is the diameter of the pipework? Does the exhaust exit the car straight or at an angle like most supra exhausts? thanks Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted February 8, 2009 Author Share Posted February 8, 2009 1.Will this be ok for a single turbo car? 2.What is the diameter of the pipework? 3.Does the exhaust exit the car straight or at an angle like most supra exhausts? thanks Already answered by PM but for anyone else who might want to know.. 1. Probably a bit restrictive to make the most out of a single tbh. 2. 3" (I think). 3. At an angle I believe. .... and a Sunday afternoon bump... Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted February 15, 2009 Author Share Posted February 15, 2009 bttt Link to comment Share on other sites More sharing options...
natony Posted February 15, 2009 Share Posted February 15, 2009 any chance this would fit an NA ? also what are the noise levels like as i need it to be less than 103db but would prefer less than that Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted February 15, 2009 Author Share Posted February 15, 2009 any chance this would fit an NA ? also what are the noise levels like as i need it to be less than 103db but would prefer less than that Nope - sorry. It is my understanding this will only fit a J-spec TT. I'd guess it's a fair way under 103db. Link to comment Share on other sites More sharing options...
JamieP Posted February 15, 2009 Share Posted February 15, 2009 Why are you selling? if its a full 3" system it will be fine on a single supe. Link to comment Share on other sites More sharing options...
Muffleman Posted February 15, 2009 Share Posted February 15, 2009 The exhaust isn't split like a normal system, from memory it's 3 sections but something like dp to middle, middle to backbox and then backbox. Because Luke had a PHR street kit, he needed a UK decat, so he got a uk 1st and 2nd decat. This then wouldn't mate to his exhaust, and seeing as we dont have an Argon tent, we couldn't really adjust it So Luke bought the Ti off of Paul Whiffin and put this up for sale as a JDM complete system Link to comment Share on other sites More sharing options...
JamieP Posted February 15, 2009 Share Posted February 15, 2009 Ahh i see. Link to comment Share on other sites More sharing options...
Swampy442 Posted February 15, 2009 Share Posted February 15, 2009 Im really interested in this but Ive reservations about fitting to a Soarer, can anyone give me some pointers, or is it a non starter? Link to comment Share on other sites More sharing options...
j1mb0b1 Posted February 15, 2009 Share Posted February 15, 2009 you have Pm Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted March 2, 2009 Author Share Posted March 2, 2009 Still available. Special deal available to members in close promixity to London, Surrey or M4 corridor all the way to Bristol. Link to comment Share on other sites More sharing options...
danhicks22 Posted March 3, 2009 Share Posted March 3, 2009 Any pics of it fitted to a Supra? Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted March 3, 2009 Author Share Posted March 3, 2009 Any pics of it fitted to a Supra? Nope - sorry. I can assure you it looks totally awesome though. Link to comment Share on other sites More sharing options...
Recommended Posts