SupraT61 Posted October 12, 2008 Share Posted October 12, 2008 Well my cars E-manage ultimate got mapped 2week ago by Ryan G and everything's been fine since then. Yesterday I decided to wire the pink wire into the EMU to use it as a de-limiter, I disconnected the battery, followed all the instructions and double checked all the wiring (only 2 wires), plugged my laptop into the EMU and delimited it. When I started it up the idle was a little shaky but ran fine and the speed signal matched the speedo on the car so I drove it 10mile to my mums, only hitting 1bar once. Then when I tried to start the car up 15min later it was running rough as anything, pumping loads of black smoke out and kept cutting out, after a struggle I finally managed to get it home. Since getting it home Iv tried to reset the ECU, removed and cleaned the 02 sensor and plugs twice (covered in black slime) checked all the wiring and pipes several times and reversed the de-limit. I'm totally out of ideas now:( Could anyone suggest anything for me to check? Could it be related to me de-limiting it? Im desperado Link to comment Share on other sites More sharing options...
supra matt Posted October 12, 2008 Share Posted October 12, 2008 have you checked you have not moved any of the dip switches mate? so its not seeing your map ? as if it over fueling that bad sounds like it not see the injector size. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 12, 2008 Share Posted October 12, 2008 Have you checked the EMU to see if its lost the map? thats what it sounds like. Link to comment Share on other sites More sharing options...
Jake Posted October 12, 2008 Share Posted October 12, 2008 Ryan G mapping piggy-backs now? Link to comment Share on other sites More sharing options...
supra matt Posted October 12, 2008 Share Posted October 12, 2008 Ryan G mapping piggy-backs now? Yes but only the greddy emu i belive for all the single auto boy's Link to comment Share on other sites More sharing options...
Ryan.G Posted October 12, 2008 Share Posted October 12, 2008 Ryan G mapping piggy-backs now? Had no choice chap, it was the only way to properly get the stock auto boxes to work with a single well. With regards the problems Rob, do what i said on the phone and get back to me Ryan Link to comment Share on other sites More sharing options...
SupraT61 Posted October 13, 2008 Author Share Posted October 13, 2008 Thanks for the replies guys, checked and the Map is on the EMU I'll check the lag times tonight. Done a compression test now and the engines fine, I thought Id blown it up at first with how it ran Last Night I re-loaded the map, reset the stock ECU, cleaned the 02 sensor and plugs again, Started up first time, a little rough at first then sorted its self out but with lots of black smoke. When I tried to restart it 2 min later it just flooded. Could any pipes/wires that could have come off that would cause this to happen? Please keep the ideas coming guys Link to comment Share on other sites More sharing options...
supra matt Posted October 13, 2008 Share Posted October 13, 2008 Can you data log the star up and idle ? Link to comment Share on other sites More sharing options...
SupraT61 Posted October 13, 2008 Author Share Posted October 13, 2008 I can do, bad thing is I don't have a AFR gauge because I ran out of money towards the end of the project and my business went bump Iv just moved in with the Mrs so Iv no chance of getting one soon either, she's not happy with my supra lol Link to comment Share on other sites More sharing options...
SupraT61 Posted October 17, 2008 Author Share Posted October 17, 2008 Lose RPM wire to the piggy back Link to comment Share on other sites More sharing options...
supra matt Posted October 17, 2008 Share Posted October 17, 2008 lol least your all sorted now mate Link to comment Share on other sites More sharing options...
SupraT61 Posted October 19, 2008 Author Share Posted October 19, 2008 Ye its sweet now, thanks guys Link to comment Share on other sites More sharing options...
rob wild Posted October 19, 2008 Share Posted October 19, 2008 Good to hear Rob Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now