Ryan.G Posted October 9, 2008 Share Posted October 9, 2008 Ap Engineering Apexi Powerfc for a 6sp Jspec comes complete with plug and plug loom and commandor for monitor parameters such as water temps, air temps, knock, boost etc. Very rare and have used them of supra's from bpu to T88. No limitations Will do a special price of £995 which includes Apexi powerfc and commandor aswell as fitting and mapping on the dyno at SRR. If being used on a single a higher map sensor will be needed which i can supply and fit also. As others will agree also the knock warning when setup properly on the powerfc is also an awesome feature. I doubt you will see a standalond ecu supplied, fitted and mapped on the dyno cheaper than this anywhere. Ryan Link to comment Share on other sites More sharing options...
JamieP Posted October 9, 2008 Share Posted October 9, 2008 Bargain. Link to comment Share on other sites More sharing options...
Steve Posted October 9, 2008 Share Posted October 9, 2008 Mine worked out more than that with mapping. Great price there Ryan Link to comment Share on other sites More sharing options...
Ryan.G Posted October 9, 2008 Author Share Posted October 9, 2008 I aim to please Doubt i will ever have another PFC for sale after this Ryan Link to comment Share on other sites More sharing options...
supratoy Posted October 9, 2008 Share Posted October 9, 2008 Hi, I'm very interested in this however because am from glasgow I have a few questions. Would you beable to fit injectors before mapping unless you dont think there is the need, and would you recommend going ttc? My spec HKS Cams HKS Induction Kit HKS SSQV Dump Valve Water Injection FMIC PWR Race Radiator Twin 6 Row HKS Oil Cooler Blitz Nur-Spec R Full System Chris Wilson Downpipe and De-Cat with 1.2bar Restrictor Ring Walbro Fuel Pump HKS Fuel Cut Defencer HKS Delimiter Could you give me the post code for ssr also? thanks Link to comment Share on other sites More sharing options...
supra dan Posted October 9, 2008 Share Posted October 9, 2008 how well would you say this would work on a t67 single? Link to comment Share on other sites More sharing options...
Ryan.G Posted October 10, 2008 Author Share Posted October 10, 2008 Hi, I'm very interested in this however because am from glasgow I have a few questions. Would you beable to fit injectors before mapping unless you dont think there is the need, and would you recommend going ttc? My spec HKS Cams HKS Induction Kit HKS SSQV Dump Valve Water Injection FMIC PWR Race Radiator Twin 6 Row HKS Oil Cooler Blitz Nur-Spec R Full System Chris Wilson Downpipe and De-Cat with 1.2bar Restrictor Ring Walbro Fuel Pump HKS Fuel Cut Defencer HKS Delimiter Could you give me the post code for ssr also? thanks Hi With the spec you have listed above i would definatly fit at least some 550cc injectors. Might as well fit some PE 650cc injectors and be done with it incase you want to go single in the future. Ensure you get them cleaned and flow tested though. I also have no problem coming up to scotland to map the car i think i will be up there at least twice in november.. With regards fitting the injectors its not something i normally offer doing but if you get stuck and no one else up there can do it i will try and help. Ryan P.s yes i would suggest converting to TTC and mapping as it kicks arse all over when mapped in. Link to comment Share on other sites More sharing options...
Ryan.G Posted October 10, 2008 Author Share Posted October 10, 2008 how well would you say this would work on a t67 single? With the powerfc have done 2 x t67, 3 x Gt4088, 2 x t61, 1 x t78, 1 x T88 All worked brilliant. Here is a T67 running a powerfc http://www.mkivsupra.net/vbb/showpost.php?p=1565798&postcount=43 Link to comment Share on other sites More sharing options...
b_have Posted October 10, 2008 Share Posted October 10, 2008 Bargain!!! I love my power FC Link to comment Share on other sites More sharing options...
supradibbs Posted October 10, 2008 Share Posted October 10, 2008 Lovely bit off kit and Ryan really knows how to map them so i would say this is a bargin He is mapping my T78 on Monday be it quite a reserved map for the time being as i dont wanna of stress the new motor i will post up the results Cant wait Link to comment Share on other sites More sharing options...
Guest KDW Posted October 10, 2008 Share Posted October 10, 2008 DIBS! Ryan you have PM. Link to comment Share on other sites More sharing options...
supratoy Posted October 10, 2008 Share Posted October 10, 2008 You have pm Link to comment Share on other sites More sharing options...
ADL Mark Posted October 10, 2008 Share Posted October 10, 2008 Oh you git, I was looking for one for ages and have finally given up and got the money allocated to buy a diesel for getting to work and back in Link to comment Share on other sites More sharing options...
tDR Posted October 10, 2008 Share Posted October 10, 2008 Good purchase Vin - you'll be in good hands with Ryan. You can likely book the Dastek dyno for mapping if you'd rather have him up here than go down to SRR. If you do I'll come over for a look and a gab Cheers, Brian. Link to comment Share on other sites More sharing options...
Ryan.G Posted October 11, 2008 Author Share Posted October 11, 2008 Sold Link to comment Share on other sites More sharing options...
Recommended Posts