Jazzy Posted October 4, 2008 Share Posted October 4, 2008 Couple of weeks ago I met up with Ryan at SRR to have the Supe tweaked, mostly boost increased, in time for Suprapod. After a few runs it was obvious that something just wasn't quite right, my T61 was making a bar of boost around 5500 rpm!! After some searching it was noticed that the cam belt had appeared to slip (with the cams at TDC the crank was a good 10 degrees out). So after having the belt and tensioner changed last week, it was back down to SRR yesterday for Ryan to work his magic. Since Ryan previoulsy owned the car it was running 566fwhp. Yesterday we managed a healthy 553fwhp, the decrease due to the restrictions of having the wastegate plummed back into the system. The best thing though was that the torque had increased from 480ftlb to 520ftlb and my god can you feel those extra fltb's on the road!! It's an absolute beast, can't wait for Suprapod now! Graph attached, also updated the link in my signature. Big thanks to both Ryan and Charlie (SRR), always an enjoyable expierience whenever they are involved Also had some fun driving Ryan's MR2 track car whilst we were road mapping it Quote Link to comment Share on other sites More sharing options...
Thorin Posted October 4, 2008 Share Posted October 4, 2008 Nice. What cams are you running? Quote Link to comment Share on other sites More sharing options...
Jazzy Posted October 4, 2008 Author Share Posted October 4, 2008 Nice. What cams are you running? It's got HKS 256 intake cam and a HKS 264 exhaust cam. Quote Link to comment Share on other sites More sharing options...
Chingy Posted October 4, 2008 Share Posted October 4, 2008 good torque figure there, nice one Quote Link to comment Share on other sites More sharing options...
Jazzy Posted October 4, 2008 Author Share Posted October 4, 2008 Thanks Really pleased with the torque figure, was a bit docile before and had loads of lag (due to the timing). Now it's a real beast and just goes! Quote Link to comment Share on other sites More sharing options...
imi Posted October 4, 2008 Share Posted October 4, 2008 mine is a bit laggy too due to the lack of timing, something that I will get Ryan to try and put right once my CW SMIC and Water Injection kit is fitted. I so need some more torque too Quote Link to comment Share on other sites More sharing options...
Jazzy Posted October 5, 2008 Author Share Posted October 5, 2008 Ryan's just uploaded my latest graph to his site (link in my sig), shown as Jazzy2. Very pleased, as I'd been watching JamieP's build thread with interest and when he had his dyno'd it made me think about changing turbo's to a T67 dbb. Well now that mine had been sorted and remapped my graph is almost idential to Jamie's, so very very happy As previous said it's a completely different car on the road, and if you read this Jamie, I'd keep yours as it is i.e. leave the cams and intake. Trust me, improving my spool to what it is now has made the world of difference, there's no way I'd want to go for more power and sacrifice the low down grunt Shows that a T61 with cams is very comparable to a T67 dbb on stockers. Quote Link to comment Share on other sites More sharing options...
bignum Posted October 5, 2008 Share Posted October 5, 2008 Nice figures Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 5, 2008 Share Posted October 5, 2008 Nice results there mate. Quote Link to comment Share on other sites More sharing options...
Homer Posted October 5, 2008 Share Posted October 5, 2008 Good results there and impressive torque, got to be happy with that Quote Link to comment Share on other sites More sharing options...
Jazzy Posted October 5, 2008 Author Share Posted October 5, 2008 Cheers guys, and yes the torque has transformed it Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 5, 2008 Share Posted October 5, 2008 Glad to hear it Jazzy. Would love to have a go in it now Who plumbed your wastegate back in and do you have any pictures? Quote Link to comment Share on other sites More sharing options...
Pig Posted October 5, 2008 Share Posted October 5, 2008 Glad to hear it Jazzy. Would love to have a go in it now Who plumbed your wastegate back in and do you have any pictures? Also, what boost were you running for those figures? Jon Quote Link to comment Share on other sites More sharing options...
Jazzy Posted October 5, 2008 Author Share Posted October 5, 2008 Glad to hear it Jazzy. Would love to have a go in it now Who plumbed your wastegate back in and do you have any pictures? More than happy to take you for another spin Ryan plumbed it back in while he still owned it , he added a flexi joint in while he was at it. Also, what boost were you running for those figures? Jon Boost was 1.45 bar Quote Link to comment Share on other sites More sharing options...
Wez Posted October 6, 2008 Share Posted October 6, 2008 Nice one Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 6, 2008 Share Posted October 6, 2008 More than happy to take you for another spin Ryan plumbed it back in while he still owned it , he added a flexi joint in while he was at it. I'll hold you to that . I remember it being real loud when you took me for a spin, must be getting confused with Wez's animal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.