Jump to content
The mkiv Supra Owners Club

Lui's Single Turbo build


lui

Recommended Posts

  • Replies 283
  • Created
  • Last Reply

Top Posters In This Topic

James/Lui are you going to mention some of the fitment issues to Joe/PHR as these are obviously only a prob on RHD motors.

 

I dont know why they didnt make the street kit vband for the downpipe like all the other kits, would possibly allow for more clearance.

Link to comment
Share on other sites

James/Lui are you going to mention some of the fitment issues to Joe/PHR as these are obviously only a prob on RHD motors.

 

I don't know why they didn't make the street kit vband for the downpipe like all the other kits, would possibly allow for more clearance.

 

Already spoke to Joe@PHR the other night telling him of the few minor issues that James@ToyotaGt had in fitting the single kit & also sent Joe link to this thread for him to have look at & hopefully will get reply with his comments soon.

 

Like you said Wez if they done downpipe from turbo with V-Band connection instead of bolted flange there would of been a bit of extra twist to make it not so close to the steering column.

Edited by lui (see edit history)
Link to comment
Share on other sites

Like you said Wez if they done downpipe from turbo with V-Band connection instead of bolted flange there would of been a bit of extra twist to make it not so close to the steering column.

 

That is the biggest problem with USA kits, they are based on kits designed for the steering column on the intake side.

Link to comment
Share on other sites

Are you still mapping on Monday Lui ?

 

Sorry not this Monday as they are trying to solve problem with one injector not working / cylinder noy firing:(

All was fine last Tuesday with all the testing & checking out + having it running for a while.

All looking forward to collect last Thursday till got phone call Wednesday saying only firing on 5 cylinders>

James thought was doggy injector so took all 6 out sent of to get clean & flow tested all came back to ToyotaGT on Friday with report saying all was fine.

They did not have time to refit injectors today but hopefully will do on Monday & hopefully solve problem.

Just seems strange all working perfect with testing Tuesday & now not.

Sure they will sort it out Monday :)

Edited by lui (see edit history)
Link to comment
Share on other sites

Sorry not this Monday as they are trying to solve problem with one injector not working / cylinder noy firing:(

All was fine last Tuesday with all the testing & checking out + having it running for a while.

All looking forward to collect last Thursday till got phone call Wednesday saying only firing on 5 cylinders>

James thought was doggy injector so took all 6 out sent of to get clean & flow tested all came back to ToyotaGT on Friday with report saying all was fine.

They did not have time to refit injectors today but hopefully will do on Monday & hopefully solve problem.

Just seems strange all working perfect with testing Tuesday & now not.

Sure they will sort it out Monday :)

 

dodgy connection somewhere ;)

Link to comment
Share on other sites

Yes Ryan and Lee spent a while poking things, scratching heads and hmmmming alot! a dodgy coil pack plug (bad contacts) were found, oddly and for future reference this gave a sympton of a very quiet Injector on that cylinder, once it was replaced all was well and the injector was audily the same as the other 5.

 

All good to roll.

 

James

Link to comment
Share on other sites

Yes Ryan and Lee spent a while poking things, scratching heads and hmmmming alot! a dodgy coil pack plug (bad contacts) were found, oddly and for future reference this gave a sympton of a very quiet Injector on that cylinder, once it was replaced all was well and the injector was audily the same as the other 5.

 

All good to roll.

 

James

 

Well found & very pleased it was something simple & nothing to major & good to hear it all sounding like it should once again.

Once again big thanks to all of you at ToyotaGT & Ryan.G

 

So is fault fully made good 100% now or does any clips or anything need to be renewed ???

Link to comment
Share on other sites

Cheers we are looking forward to it too.

 

Ryan took a view on your Water injection setup which you may want to disscuss with him. :)

James

 

Will do will wait for Ryan to call us but at present it works by the injection cycle by when it hits about 0.9bar it comes on & feeds whatever it needs into it more boost you go more it feeds in but will see what Ryan suggests

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.