hodge Posted September 24, 2008 Share Posted September 24, 2008 I am fitting a polished throttle body to my mates supra with the traction control removed welded and blended. Can someone tell me if the water pipes which go to the bottom require joining together or just blanking off. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
heckler Posted September 24, 2008 Share Posted September 24, 2008 I just bypassed them on mine. Put a new hose on to do the bypass Quote Link to comment Share on other sites More sharing options...
hodge Posted September 24, 2008 Author Share Posted September 24, 2008 So basically joining the hoses together. Would it make any difference if the hoses were just blanked off. Quote Link to comment Share on other sites More sharing options...
uk-rich Posted September 24, 2008 Share Posted September 24, 2008 i joined mine up Quote Link to comment Share on other sites More sharing options...
Terminator Posted October 3, 2008 Share Posted October 3, 2008 The water pipes in the TB just run water straight through and out. As you are bypassing theTB, just blanking will be fine, no need for silly loops of hose that serve no purpose. Quote Link to comment Share on other sites More sharing options...
colsoop Posted October 3, 2008 Share Posted October 3, 2008 no need to touch the metal pipes at the bottom of the TB Run a hose from the ICV straight through bypassing the throttle body. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.