Markie Posted March 7, 2005 Share Posted March 7, 2005 Link to the switch I have. http://www.maplin.co.uk/Module.aspx?ModuleNo=44877&TabID=1&source=15&WorldID=&doy=7m3 It says it illuminates. Does this mean it will light up when its switched on or all the time? Trying to wire the damn thing in and blown 3 10A fuses already Anyone have an idea on how to plum these 3 pin switches in so that it works to run the fogs on and also lights up when the switch is set to on. After returning from the garage I had an idea of wiring it up like the following: Power from when the lights turned on connected to PIN 1, wire to fogs on PIN 2 (Which Works) and then before I had an earth connected to PIN 3, but now I think it should have a feed off PIN 2 to light the LED inside the switch.. Any have ideas on this stuff? Link to comment Share on other sites More sharing options...
heckler Posted March 7, 2005 Share Posted March 7, 2005 the light should come on when the fogs are switched on... well.. does on mine.. Link to comment Share on other sites More sharing options...
heckler Posted March 7, 2005 Share Posted March 7, 2005 "I think" with out looking at mine.... pin 1 is from battery, pin 2 is to fogs, pin 3 to ground. Could be wrong like.... best person to ask is emin (supraTTmyster) Link to comment Share on other sites More sharing options...
Markie Posted March 7, 2005 Author Share Posted March 7, 2005 Hmm, I tried that way... Damn stupid electronics!! How do I get hold of emin? I did a search, but could not find him Link to comment Share on other sites More sharing options...
heckler Posted March 7, 2005 Share Posted March 7, 2005 Hmm, I tried that way... Damn stupid electronics!! How do I get hold of emin? I did a search, but could not find him try this link Link to comment Share on other sites More sharing options...
GlennMR2 Posted March 8, 2005 Share Posted March 8, 2005 markie..........my switch is a 3 pin unit and i have a live from dimmer switch a wire to the fogs and the other 1 is earth its also a little light on the swith as well but that just comes on no other wiring needed take a pic of the back of the switch...on my swith it sed what wire had to go where Link to comment Share on other sites More sharing options...
Markie Posted March 8, 2005 Author Share Posted March 8, 2005 Mines just labeled 1 2 3 on the pins.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now