Dann Posted September 7, 2008 Share Posted September 7, 2008 That bolt that hold the pully on to the crank, I cannot undo the bugger, How tight is it I have snapped 2 breaker bars and my impact gun wont move it. What have you guys used to get it undone ? Any tips will be most gratefull as I am getting stressed with it lol many thanks Dann:search: Link to comment Share on other sites More sharing options...
Luka-P Posted September 7, 2008 Share Posted September 7, 2008 Hi, This has been covered a fair few times. You're best locking it off with a tool shown in the cambelt change. Get a breaker bar on the bolt with a good socket, make sure its flush and drop a 5 foot bit of scaffold over the top as a sleeve. This should give you enough torque to get it off! Take your bonnet off if it gets in the way. If this doesn't work, weld a socket on and go that way. Have Fun! Link to comment Share on other sites More sharing options...
merckx Posted September 7, 2008 Share Posted September 7, 2008 Well over 200 lbs.ft. Link to comment Share on other sites More sharing options...
wile e coyote Posted September 8, 2008 Share Posted September 8, 2008 Got my local lexus garage to loosen it for me as they have the same problems with the GS300 and have the right tool done it with in seconds after me trying for days Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now