thesword22 Posted August 19, 2008 Share Posted August 19, 2008 hi guys just wondering if anyone on here does remapping. i have a import tt and its still running on the map from japan so so the fueling is all whacked lol so need to get it remapped i believe. anywhos anyone on here do it and a rough guide price as well. cheers in advance Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2008 Share Posted August 19, 2008 Which ECU do you have? Ryan.G would be the person most recommend, you'd have to contact him to get a price, but he's quite reasonable Link to comment Share on other sites More sharing options...
JustGav Posted August 19, 2008 Share Posted August 19, 2008 I'm suspecting this is a stock ECU, in which case a remap would be hellish expensive, but more importantly, what is the spec of the rest of the car other than import TT? Link to comment Share on other sites More sharing options...
JamieP Posted August 19, 2008 Share Posted August 19, 2008 http://www.2bartuning.com/ Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 hi guys cheers for the response so far it is standard apart from a hks ssqv2 and a filter. have toyed with the idea of putting the airbox back on or amking a replacement. will be having a custom straight through stainless exhaust (from the first cat back) made up very soon. will be 2.5 tubing. Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2008 Share Posted August 19, 2008 You don't need to remap it. All thats needed is an ECU reset (disconnect battery for 2-3 minutes) and the ECU will adjust for the new fuel - which by the way should only be high octane like Optimax. The ECU can adjust itself a surprising degree to cope with different petrol, but after 10 yrs of experience by members here there is absolutely no need to do anything to the ECU to cope for UK fuel. Just make sure you get a full tank of petrol to flush out any old stuff thats in there and do the reset mentioned above Link to comment Share on other sites More sharing options...
supra dan Posted August 19, 2008 Share Posted August 19, 2008 what makes you think it needs remapped? the stock ecu isnt really mappable so may be another problem. you could try resetting the ecu tho. ok too slow Link to comment Share on other sites More sharing options...
AndyT Posted August 19, 2008 Share Posted August 19, 2008 I still get this mixed up but I think the 1st cat should be the first out if you intend to leave a cat in at all. I'll go search it out. Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 tbhe battery was removed while it was in the workshop a few months ago. all i run it on is 99 octane rating is this good enough. i had it dynoed a while back and the graph was all over the price. the bloke said it needed sorting out. Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2008 Share Posted August 19, 2008 i had it dynoed a while back and the graph was all over the price. the bloke said it needed sorting out. Then you have another issue Can you post the dyno print on here, ideally with the AFR plot. What boost level is it running at? Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 i will try and find the printout the boost seems to be fine but i have only just stopped using it daily so i can work on it and a boost gauge is my first priority. i have one its just having the time tlo fit it lol Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 i have the dynolicous software for the ipod touch i dont know if it will be any help but i will go out and do a run with it and it will show the graph. be back in a about 30 Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2008 Share Posted August 19, 2008 i have the dynolicous software for the ipod touch i dont know if it will be any help but i will go out and do a run with it and it will show the graph. be back in a about 30 Don't bother mate, that won't show anything useful. Really need an AFR print or readings from your AFR gauge when we're talking about fueling. Is it decatted? Link to comment Share on other sites More sharing options...
JustGav Posted August 19, 2008 Share Posted August 19, 2008 Does it have any mods on it, boost controller, fcd or the like? Sounds almost like it is BPU'd and the overfuelling bit would be at the top like it is expected, but without the dyno chart it is hard to say. Link to comment Share on other sites More sharing options...
gaz1 Posted August 19, 2008 Share Posted August 19, 2008 02 sensor may need changing while your at it Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2008 Share Posted August 19, 2008 02 sensor may need changing while your at it That's only make a difference off-boost Gaz. Though it's a little unclear where the issue is, what it is, or even if there is one! Link to comment Share on other sites More sharing options...
gaz1 Posted August 19, 2008 Share Posted August 19, 2008 That's only make a difference off-boost Gaz. Though it's a little unclear where the issue is, what it is, or even if there is one! i knew that:innocent: Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 right i have just got back from doing a few runs and below are the two best runs dont kno wif tbhey show anything decent or not but i think they are pretty cack tbh Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 it is totally standard both cats are still there and its defo not bpu i wish lol Link to comment Share on other sites More sharing options...
bignum Posted August 19, 2008 Share Posted August 19, 2008 Teapot-chocalate, Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 :blink: Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted August 19, 2008 Share Posted August 19, 2008 i think you just need to service your car.. Link to comment Share on other sites More sharing options...
thesword22 Posted August 19, 2008 Author Share Posted August 19, 2008 it does need a good service your right there jurgen. can someone give me some some advice on what to service and the sort of parts to use, whether i use halfords jobbies or specialist ones????? i just need my ramps free to do it lol. Link to comment Share on other sites More sharing options...
TLicense Posted August 19, 2008 Share Posted August 19, 2008 Your ramps? Link to comment Share on other sites More sharing options...
thesword22 Posted August 20, 2008 Author Share Posted August 20, 2008 yea i have a workshop with currently two two poster car lifts/ramps. that way i can access everything easier lol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now