Chris Wilson Posted August 18, 2008 Share Posted August 18, 2008 3 mm diameter Inconel EGT probes. Probe only, needs terminating with the plug off your existing one. New high temp K type plugs and sockets available, to allow you to use these probes with any existing set up at 7.50 a pair. New stainless steel 3 mm inside diameter (for the above probes) 1/8 NPT male thread manifold adaptors also available. These are 12 pounds each, they will replace 90% of the probe adaptors currently in use. The probes themselves are 36 pounds each, plus £4.80 insured P&P. Inconel has a much higher temperature resilience than the cheapo ones that come in the Greddy and other common kits, and could mean the difference between a failure that takes your turbo with it, or trouble free usage. Electrically they are a direct replacement and your gauges will read the same. To order please E_MAIL me [email protected] I have 3 only of everything. Link to comment Share on other sites More sharing options...
MarkR Posted August 18, 2008 Share Posted August 18, 2008 I'll have one please. Link to comment Share on other sites More sharing options...
jimwire Posted August 18, 2008 Share Posted August 18, 2008 I'll take one with a manifold adapter too please. Link to comment Share on other sites More sharing options...
MarkR Posted August 18, 2008 Share Posted August 18, 2008 Oh, I need the manifold adaptor too please Link to comment Share on other sites More sharing options...
bolarbag Posted August 18, 2008 Share Posted August 18, 2008 Emailed... Link to comment Share on other sites More sharing options...
Wez Posted August 18, 2008 Share Posted August 18, 2008 Do you have any spare connectors, the probe you got me has a connector on it and I need the other end to wire into my loom. Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 18, 2008 Author Share Posted August 18, 2008 I will have to pick up the plugs and sockets and the adapters later this week, they are stored away from home, but if you all e-mail me with your needs I'll work out the total prices and you should have them either later this week or very early next. Thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 19, 2008 Author Share Posted August 19, 2008 Updated. Link to comment Share on other sites More sharing options...
MarkR Posted August 19, 2008 Share Posted August 19, 2008 You have email...... Link to comment Share on other sites More sharing options...
Wez Posted August 19, 2008 Share Posted August 19, 2008 You have email from me as well Link to comment Share on other sites More sharing options...
MarkR Posted August 19, 2008 Share Posted August 19, 2008 This thread is so timely I sent Chris an email about these about a day ot two before the thread appeared Link to comment Share on other sites More sharing options...
jimwire Posted August 19, 2008 Share Posted August 19, 2008 paid via paypal Link to comment Share on other sites More sharing options...
MarkR Posted August 19, 2008 Share Posted August 19, 2008 Paid by Bank Transfer. Link to comment Share on other sites More sharing options...
bolarbag Posted August 19, 2008 Share Posted August 19, 2008 Still waiting on your reply via email - are you getting more in? Have you any left if so, I may take two... email [email protected] Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 19, 2008 Author Share Posted August 19, 2008 Got one set left. IE, one probe, one adapter and one pair of plug / socket. If there's a surge of interest I will order more. Link to comment Share on other sites More sharing options...
bolarbag Posted August 19, 2008 Share Posted August 19, 2008 How much shall I send then chris incl. deliv., pm or email if you like Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 19, 2008 Author Share Posted August 19, 2008 £60.30 all in unless by Paypal, in which case add 4% I have e-mailed you payment options, cheers. Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 19, 2008 Author Share Posted August 19, 2008 If we can get 4 more people wanting these I'll order a new batch. Otherwise they are now sold, thanks. If there's interest in adaptors to weld into thin wall tubular manifolds that don't have the thickness to tap safely I would consider making some stainless weld in adapters ready threaded with a 1/8 NPT thread. Link to comment Share on other sites More sharing options...
bolarbag Posted August 19, 2008 Share Posted August 19, 2008 Consider it sold, paypal will be with ya in 20mins cheers Link to comment Share on other sites More sharing options...
Wez Posted August 19, 2008 Share Posted August 19, 2008 If we can get 4 more people wanting these I'll order a new batch. Otherwise they are now sold, thanks. If there's interest in adaptors to weld into thin wall tubular manifolds that don't have the thickness to tap safely I would consider making some stainless weld in adapters ready threaded with a 1/8 NPT thread. Did you get my email chris? Link to comment Share on other sites More sharing options...
bolarbag Posted August 19, 2008 Share Posted August 19, 2008 Payment sent via paypal @ [email protected] Let me know if there is going to be a second batch I'll probably buy another Link to comment Share on other sites More sharing options...
bolarbag Posted August 29, 2008 Share Posted August 29, 2008 Whats the chances of anymore of these? Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 29, 2008 Author Share Posted August 29, 2008 Excellent, but I need to order at least 4 to get a sensible price. Anyone else want one, or as a kit? BTW, don't bend the sensor too sharply, they don't like it. You need about 8 to 10 mm of tip in the exhaust stream, that's all. Link to comment Share on other sites More sharing options...
MarkR Posted August 29, 2008 Share Posted August 29, 2008 Got mine this week. Cheers Chris Link to comment Share on other sites More sharing options...
bolarbag Posted August 29, 2008 Share Posted August 29, 2008 Yeah their good! Could ya email me a price singularly if theres no other interest? [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts