Dash Panel Help

[Nic]

I have a customer who needs a right hand side ignition dash panel for a UK spec Supra. Unfortunately these have been discontinued and Toyota no longer have stock. I am not as familiar with the UK Spec Supra so need some clarification if anyone can help.

 

I believe all the UK spec Supras have 3 holes in the ignition panel for the 3 buttons as shown here, correct?

 

I can supply pre-facelift J-spec ignition dash panels, which are basically the same, but AFAIK these are only available with a single hole. Is there anyone with a pre-facelift J-spec Supra that has more than one hole in the ignition panel? If you do, would you mind sending me your frame and model number so I can check the part number.

 

http://img215.imageshack.us/img215/7140/trdwheel7eq.jpg

 

[Nic]

I have a customer who needs a right hand side ignition dash panel for a UK spec Supra. Unfortunately these have been discontinued and Toyota no longer have stock. I am not as familiar with the UK Spec Supra so need some clarification if anyone can help.

 

I believe all the UK spec Supras have 3 holes in the ignition panel for the 3 buttons as shown here, correct?

 

I can supply pre-facelift J-spec ignition dash panels, which are basically the same, but AFAIK these are only available with a single hole. Is there anyone with a pre-facelift J-spec Supra that has more than one hole in the ignition panel? If you do, would you mind sending me your frame and model number so I can check the part number.

 

http://img215.imageshack.us/img215/7140/trdwheel7eq.jpg

 

[tooquicktostop]

I have one of these UK spec 3 hole panels in my garage spare

[tooquicktostop]

I have one of these UK spec 3 hole panels in my garage spare

[Nic]

I have one of these UK spec 3 hole panels in my garage spare

 

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

[Nic]

I have one of these UK spec 3 hole panels in my garage spare

 

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

[tooquicktostop]

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

 

Nic

 

It has had a 'stick on' carbon dash at some point so it would need some work, may look out of place with a new set of panels

[tooquicktostop]

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

 

Nic

 

It has had a 'stick on' carbon dash at some point so it would need some work, may look out of place with a new set of panels

[SteveR]

I think there are a few more UK/J-Spec dash panel differences, Nic. Let me go seaarch for the thread I have in mind..

 

EDIT here we go, posts 3 & 4 are of note:

http://www.mkivsupra.net/vbb/showthread.php?t=157200