pete.w Posted August 5, 2008 Share Posted August 5, 2008 could someone please comfirm the safe psi i can run a uk tt please ,im thinking 19psi ? Quote Link to comment Share on other sites More sharing options...
Jim_1979 Posted August 5, 2008 Share Posted August 5, 2008 Should be ok mate. Most people would say 1.2bar is the limit. Quote Link to comment Share on other sites More sharing options...
michael Posted August 5, 2008 Share Posted August 5, 2008 (edited) What modifications do you have in place? Both cats out? At BPU it's generally considered that 1.2 bar or 17.5psi is about the limit before you just generate more heat rather than power. I ran 1.3 / 19psi for a while on my UK at BPU but when I had the SAFC II setup we produced the same power at 1.2. Edited August 5, 2008 by michael (see edit history) Quote Link to comment Share on other sites More sharing options...
pete.w Posted August 5, 2008 Author Share Posted August 5, 2008 ye thanks pips its de-cat and all the bpu mods, just asking as im playing with me profec 2 controller and when i put me foot down it displays 1.20 so im asuming this is around 19 psi WHICH IS 1.2 bar(IF ME MATHS ARE ANY GOOD) Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 6, 2008 Share Posted August 6, 2008 No your maths is no good 1bar = 14.5psi so 1.2bar = 17.4psi. -Ian Quote Link to comment Share on other sites More sharing options...
pete.w Posted August 6, 2008 Author Share Posted August 6, 2008 oooooooooooops i knew i should have gone to school that day Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted August 6, 2008 Share Posted August 6, 2008 I have this handy little conveter on my desktop, http://joshmadison.com/article/convert-for-windows/ Quote Link to comment Share on other sites More sharing options...
wile e coyote Posted August 6, 2008 Share Posted August 6, 2008 You can change it to show psi mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.