bolarbag Posted August 6, 2008 Share Posted August 6, 2008 If its all its cracked up to be in terms of the spec stated alone, then this is going to be a very tidy package indeed!!! The software is a little strange, but then so is every ecu on first try, I like this a lot, if its reliable its too cheap Link to comment Share on other sites More sharing options...
SimonB Posted August 6, 2008 Share Posted August 6, 2008 I presume it's nothing to do with Solaris as in the operating system from Sun? Or is it? Bit of a confusing name for a company in a sort of similar field! The other thing I haven't seen asked which people might be interested in is can it handle the stock idle control valve? I guess it would use up 4 outputs? Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 I presume "downshift blip" is for auto/tip only? How else would it know you were about to downshift? Yes but im sure it can be made to work with a manual with a few tricks Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 If its all its cracked up to be in terms of the spec stated alone, then this is going to be a very tidy package indeed!!! The software is a little strange, but then so is every ecu on first try, I like this a lot, if its reliable its too cheap The software really comes alive when you are connected. Mapping one of these is not for the faint hearted If you are interested i can send you some logs so you can see the full potential of the logging software. SView Ryan Link to comment Share on other sites More sharing options...
Alex Posted August 6, 2008 Share Posted August 6, 2008 (edited) I expect if you're on the brake/decelerating it could know that and blip the throttle. This would be set within tolerances so that a light decel in traffic didn't do it. Edited August 6, 2008 by Alex (see edit history) Link to comment Share on other sites More sharing options...
johnny g Posted August 6, 2008 Share Posted August 6, 2008 Yes but im sure it can be made to work with a manual with a few tricks Do tell Link to comment Share on other sites More sharing options...
johnny g Posted August 6, 2008 Share Posted August 6, 2008 I expect if you're on the brake/decelerating it could know that and blip the throttle. How would it now how much to blip? You might go from say 5th to 2nd and the blip required would be a lot more than from 5th-4th? (I know you should really go down each gear ) Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 I presume it's nothing to do with Solaris as in the operating system from Sun? Or is it? Bit of a confusing name for a company in a sort of similar field! The other thing I haven't seen asked which people might be interested in is can it handle the stock idle control valve? I guess it would use up 4 outputs? I had nothing to do with the brand name so cant comment on that sorry Simon. Yup 4 outputs would go but there is still enough to run all the systems of a supra, steppers motors are fully support and fully working on Wesleys car. It also works using P+I for fully closed loop Ryan Keep them coming Link to comment Share on other sites More sharing options...
SimonB Posted August 6, 2008 Share Posted August 6, 2008 I guess you'd have to use a clutch switch. I can't see how you'd get it synchronised though. Anyway, that's half the satisfaction of driving a manual car, when you manage a perfect change . Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 Do tell Well you're car will be the test dummy Link to comment Share on other sites More sharing options...
Alex Posted August 6, 2008 Share Posted August 6, 2008 How would it now how much to blip? You might go from say 5th to 2nd and the blip required would be a lot more than from 5th-4th? (I know you should really go down each gear ) Well if you're going to drive like a tool then there's no help I expect you'd map this to happen under significant decel and maybe only you've hit the toggle switch... Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 I expect if you're on the brake/decelerating it could know that and blip the throttle. This would be set within tolerances so that a light decel in traffic didn't do it. Bingo as well as the use of a Clutch switch. The ecu will also know which gear you are in based on speed and rpm. Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 Another bonus of the ecu is that you dont need to clutter the whole dash with gauges now. As the Solaris units can drive any sensor directly as well as K-Type's (no amp needed) So in the event of an unwanted parameter it will enable limp home mode. But i will also be keeping an eye on things through a dash2 which is fully supported on my new track toy. Is also alot cheaper than a complete defi setup http://www.race-technology.com/dash2_2_31.html Link to comment Share on other sites More sharing options...
supra matt Posted August 6, 2008 Share Posted August 6, 2008 DO i recall you saying this wont work on the auto Ryan? Link to comment Share on other sites More sharing options...
Wez Posted August 6, 2008 Author Share Posted August 6, 2008 The ecu will also know which gear you are in based on speed and rpm. Which is great for gear based boost control :innocent:aslong as you dont have a speed delimiter still fitted Link to comment Share on other sites More sharing options...
Ryan.G Posted August 6, 2008 Share Posted August 6, 2008 DO i recall you saying this wont work on the auto Ryan? Not at the moment mate but hopefully next year we will have it driving an auto box properly Ryan Link to comment Share on other sites More sharing options...
supra matt Posted August 6, 2008 Share Posted August 6, 2008 Not at the moment mate but hopefully next year we will have it driving an auto box properly Ryan E manage on route Link to comment Share on other sites More sharing options...
Muffleman Posted August 6, 2008 Share Posted August 6, 2008 Great to see something a little more in depth available, and glad to see it's surfacing after your efforts mate The AEM is a great ecu but GEMS themselves have been using better hardware for a couple of years now and the AEM hasn't changed. MoTeC's are as we know great but price prohibitive for the most part. Look forward to a demo and a crack at mapping one Link to comment Share on other sites More sharing options...
Ryan.G Posted August 7, 2008 Share Posted August 7, 2008 S6 now arrived for my Mr2 Track car. Now need to order the Race2 Dash Link to comment Share on other sites More sharing options...
gaz1 Posted August 7, 2008 Share Posted August 7, 2008 have you got 1 you could fit in mine before mapping saturday:d Link to comment Share on other sites More sharing options...
johnny g Posted August 7, 2008 Share Posted August 7, 2008 S6 now arrived for my Mr2 Track car. Now need to order the Race2 Dash Ryan, as you know my build is wayyy on now - I'd like to have a look at that dash in the '2! Will you take a few pictures? Link to comment Share on other sites More sharing options...
Wez Posted August 7, 2008 Author Share Posted August 7, 2008 S6 now arrived for my Mr2 Track car. Now need to order the Race2 Dash Link to comment Share on other sites More sharing options...
Homer Posted August 7, 2008 Share Posted August 7, 2008 Ryan, sorry mate, another question... The S6 can do wasted spark, so presumably you could use it for an 8cyl engine? Would this still need something like a DLI? How much more is the S8 version? I'm guessing it's towards motec prices.. Link to comment Share on other sites More sharing options...
JamieP Posted August 7, 2008 Share Posted August 7, 2008 I see lots of AEM's coming on the market, pity this was not released a couple of weeks back, only just brought an AEM:( Link to comment Share on other sites More sharing options...
Ryan.G Posted August 7, 2008 Share Posted August 7, 2008 Ryan, as you know my build is wayyy on now - I'd like to have a look at that dash in the '2! Will you take a few pictures? Yh sure mate but wont be for a while yet Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now