Trig Posted July 26, 2008 Share Posted July 26, 2008 been having a poke around the electrics today with my multimeter, Engine hasnt started for a while. Ive had an electrical issue since my NA-TT swop. It turns over fine but just doesnt want to fire up. Ive checked a couple of bits, im getting no power at any of the spark plugs, no power at any of the injectors (im guessing this is why it wont start?) where does this power come from? Anyone know what i should be checking next? Think im gonna try and get an auto electrician round this week and see whats wrong with it Quote Link to comment Share on other sites More sharing options...
heckler Posted July 26, 2008 Share Posted July 26, 2008 injectors get there power direct from the ignition, however the ECU controls them on the ground side. http://www.internetwork.org.uk/manu/system/ecugte/ecugte3.htm (just ignore the resistor pack part) there is also a 7.5amp fuse aswell Quote Link to comment Share on other sites More sharing options...
Trig Posted July 26, 2008 Author Share Posted July 26, 2008 where abouts is the fuse? could it be possible that it is blown? Are you about at the moment Si? (as in this country?) If so would you fancy coming up and having a look over? Quote Link to comment Share on other sites More sharing options...
heckler Posted July 26, 2008 Share Posted July 26, 2008 where abouts is the fuse? could it be possible that it is blown? Are you about at the moment Si? (as in this country?) If so would you fancy coming up and having a look over? yeah, in the country, however i have work commitments which dont allow me to go further than an hour of the camp the fuse is top right hand fuse in the drivers footwell Quote Link to comment Share on other sites More sharing options...
Trig Posted July 26, 2008 Author Share Posted July 26, 2008 yeah, in the country, however i have work commitments which dont allow me to go further than an hour of the camp the fuse is top right hand fuse in the drivers footwell ah damn! ill go check the fuse and report back Quote Link to comment Share on other sites More sharing options...
Trig Posted July 26, 2008 Author Share Posted July 26, 2008 just checked it and the fuse is ok? what should i check next? Quote Link to comment Share on other sites More sharing options...
heckler Posted July 26, 2008 Share Posted July 26, 2008 hmmm... guess your down to checking connections... or even find a spare ecu at a push... Quote Link to comment Share on other sites More sharing options...
heckler Posted July 26, 2008 Share Posted July 26, 2008 this is the wiring diagrams for the engine control sytems... http://www.internetwork.org.uk/manu/system/ecugte/ecugte.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.