Zofix Posted July 25, 2008 Share Posted July 25, 2008 How do I connect the pipe which is supplied with the blitz sus air intake kit to the MAF sensor? when there is only following 1 coupler? I know the coupler needs to be between the filter and the pipe. how you can help me out:( Quote Link to comment Share on other sites More sharing options...
Zofix Posted July 26, 2008 Author Share Posted July 26, 2008 Bumpski nobody knows? Quote Link to comment Share on other sites More sharing options...
Branners Posted July 26, 2008 Share Posted July 26, 2008 I think you have to take the stock MAF pipe and 'adapt' it to fit the blitz filter, ie you chop the end off and jubilee clip it on. But I could be wrong. Quote Link to comment Share on other sites More sharing options...
Zofix Posted July 26, 2008 Author Share Posted July 26, 2008 Hmm I think there is another way.. I hope somebody that installed it can reply to this topic... Quote Link to comment Share on other sites More sharing options...
styggen82 Posted July 27, 2008 Share Posted July 27, 2008 what do you need to know? wich way the maf is supposed to be? where? what car is it to be installed in? and have you got any picures? Quote Link to comment Share on other sites More sharing options...
Zofix Posted July 27, 2008 Author Share Posted July 27, 2008 Its a US spec, the same as UK spec... I just need to know how you mount the pipe that comes with the kit to the MAF sensor.. I can take some photos later Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.