heckler Posted July 24, 2008 Share Posted July 24, 2008 as I now have a Bosch 044 fuel pump, I thought I show how huge it is compared to a walbro! http://www.internetwork.org.uk/pump.jpg Link to comment Share on other sites More sharing options...
DamanC Posted July 24, 2008 Share Posted July 24, 2008 Its not the size that counts, its how you use it! Link to comment Share on other sites More sharing options...
heckler Posted July 24, 2008 Author Share Posted July 24, 2008 Its not the size that counts, its how you use it! so I have been told (size helps) Link to comment Share on other sites More sharing options...
Alex Posted July 24, 2008 Share Posted July 24, 2008 Its not the size that counts, its how you use it! Girls say that to make you feel better. Link to comment Share on other sites More sharing options...
Sharpie Posted July 24, 2008 Share Posted July 24, 2008 THE Daddy! Link to comment Share on other sites More sharing options...
Homer Posted July 24, 2008 Share Posted July 24, 2008 Crikey! Wez said they were huge but I didn't realise they were that big. Can you use a stock hanger with that? Link to comment Share on other sites More sharing options...
heckler Posted July 24, 2008 Author Share Posted July 24, 2008 Crikey! Wez said they were huge but I didn't realise they were that big. Can you use a stock hanger with that? I'll let you know when I fit it Link to comment Share on other sites More sharing options...
Wez Posted July 24, 2008 Share Posted July 24, 2008 Crikey! Wez said they were huge but I didn't realise they were that big. Can you use a stock hanger with that? Yes Link to comment Share on other sites More sharing options...
heckler Posted July 24, 2008 Author Share Posted July 24, 2008 good used of cable ties Link to comment Share on other sites More sharing options...
Wez Posted July 24, 2008 Share Posted July 24, 2008 good used of cable ties Thats an example install, I havent done mine yet. Link to comment Share on other sites More sharing options...
heckler Posted July 24, 2008 Author Share Posted July 24, 2008 Thats an example install, I havent done mine yet. plan to do mine over the weekend Link to comment Share on other sites More sharing options...
Kranz Posted July 24, 2008 Share Posted July 24, 2008 I've got one of those somewhere.... half of the fuel system for an XJ220 Le Mans race engine Link to comment Share on other sites More sharing options...
DamanC Posted July 24, 2008 Share Posted July 24, 2008 Girls say that to make you feel better. Yes, that is it Alex. Link to comment Share on other sites More sharing options...
MarkR Posted July 24, 2008 Share Posted July 24, 2008 plan to do mine over the weekend Take pics Si, it'll be good to see Link to comment Share on other sites More sharing options...
heckler Posted July 25, 2008 Author Share Posted July 25, 2008 ok, just a few pics from todays effort. http://www.internetwork.org.uk/pump/pump1.jpg a bare hanger. http://www.internetwork.org.uk/pump/pump2.jpg Fuel pipe cut short to accomodate the some-what taller pump http://www.internetwork.org.uk/pump/pump3.jpg The end "tab" trimmed to allow the filter adaptor to sit in appox correct position http://www.internetwork.org.uk/pump/pump4.jpg Pump fitted with heavy duty cable ties. I have put this in the tank and the pump sits about 10mm to low, so tommorow I'll fix that! Link to comment Share on other sites More sharing options...
dangerous brain Posted July 25, 2008 Share Posted July 25, 2008 Noisier than a noisy thing on noisy day. Well mine is anyways Link to comment Share on other sites More sharing options...
MarkR Posted July 27, 2008 Share Posted July 27, 2008 Dynamat over the cover? Link to comment Share on other sites More sharing options...
Alex Posted July 27, 2008 Share Posted July 27, 2008 Dynamat over the cover? Yep I would dynamat the entire boot and rear wheel archs if I had another, massive source of noise before you fit a 044 Link to comment Share on other sites More sharing options...
heckler Posted July 27, 2008 Author Share Posted July 27, 2008 right last picture before it went in the tank.. http://www.internetwork.org.uk/pump/pump5.jpg got all running, engine even started! static pressure checked, and it not too noisey either Link to comment Share on other sites More sharing options...
Wez Posted July 27, 2008 Share Posted July 27, 2008 Great work Si Link to comment Share on other sites More sharing options...
MarkR Posted July 28, 2008 Share Posted July 28, 2008 Nice one, thanks for the pics Link to comment Share on other sites More sharing options...
heckler Posted July 28, 2008 Author Share Posted July 28, 2008 take a bit of er... guestimation to make sure the pump sits at the correct height, ended up cutting the bottom of the hanger off. Link to comment Share on other sites More sharing options...
MarkR Posted July 28, 2008 Share Posted July 28, 2008 I was wondering about that. Couldn't you measure the distance from the bottom of the stock pump to the top of the hanger and make sure the new one lines up to the same spot? Link to comment Share on other sites More sharing options...
heckler Posted July 28, 2008 Author Share Posted July 28, 2008 I was wondering about that. Couldn't you measure the distance from the bottom of the stock pump to the top of the hanger and make sure the new one lines up to the same spot? i based it on the height of the filter from the top, so due to the size/location of the filter and adaptor, I ended up cutting the bottom of the hanger off! Fits like a glove! Link to comment Share on other sites More sharing options...
MarkR Posted July 28, 2008 Share Posted July 28, 2008 Cool, looking forward to doing mine Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now