tooquicktostop Posted July 21, 2008 Share Posted July 21, 2008 I am meeting RyanG at SRR tomorrow morning for a mapping session on my car, just over one year since the car made any boost I can't wait to get the single power back again, may not get it all done tomorrow as I have a new HKS TypeR intercooler I have to fit (4 row XS power at the moment) and may be restricted a bit by intake temps especially as it looks like it will be a warm day I get so nervous before mapping sessions, I actually hate watching my car on rollers at full chat, hope to see some good results tomorrow however then on to ACE cafe Link to comment Share on other sites More sharing options...
Wez Posted July 21, 2008 Share Posted July 21, 2008 Can you not get the new IC on before, would be worth while if you could. Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 21, 2008 Author Share Posted July 21, 2008 Can you not get the new IC on before, would be worth while if you could. I dont have a clue with spanners and knowone could fit me in anywhere at such short notice, would be willing to pay anyone who fancied doing it for me before 9am tomorrow Link to comment Share on other sites More sharing options...
colsoop Posted July 21, 2008 Share Posted July 21, 2008 Are you just swapping cores over or is it the full pipework too ? Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 21, 2008 Author Share Posted July 21, 2008 Are you just swapping cores over or is it the full pipework too ? Core only the pipework is HKS already, I have a fill set of HKS pipes with the typeR just incase Link to comment Share on other sites More sharing options...
colsoop Posted July 21, 2008 Share Posted July 21, 2008 Core only the pipework is HKS already, I have a fill set of HKS pipes with the typeR just incase It shouldn't be too much of a chore to swap the 2 over then. Link to comment Share on other sites More sharing options...
Wez Posted July 21, 2008 Share Posted July 21, 2008 Whip the lights outs, take the bumper off and swap over the cores, job done Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 21, 2008 Author Share Posted July 21, 2008 Whip the lights outs, take the bumper off and swap over the cores, job done Would be more like this with me doing it Open shed, find the 3-4 spanners I own, clean the rust off them, open bonnet, remove headlights, damage wires, cut fingers, loose nuts and bolts, get bumper off, start removing core, run out of talent call for help, go to the pub Link to comment Share on other sites More sharing options...
johnny g Posted July 21, 2008 Share Posted July 21, 2008 Would be more like this with me doing it Open shed, find the 3-4 spanners I own, clean the rust off them, open bonnet, remove headlights, damage wires, cut fingers, loose nuts and bolts, get bumper off, start removing core, run out of talent call for help, go to the pub You're still way ahead of me mate. I changed my headlight bulbs last night and did a run for joy. Link to comment Share on other sites More sharing options...
Wez Posted July 21, 2008 Share Posted July 21, 2008 Take the new core with you and get Ryan to swap it outside SRR Link to comment Share on other sites More sharing options...
gaz1 Posted July 21, 2008 Share Posted July 21, 2008 Take the new core with you and get Ryan to swap it outside SRR yeah i reckon he would too, he aims to please;) Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 21, 2008 Author Share Posted July 21, 2008 Mark from Phoenix is coming over to fit it tonight Link to comment Share on other sites More sharing options...
lui Posted July 21, 2008 Share Posted July 21, 2008 Mark from Phoenix is coming over to fit it tonight Nice one Dean hope all goes well see you tomorrow Link to comment Share on other sites More sharing options...
ivan Posted July 21, 2008 Share Posted July 21, 2008 Mark from Phoenix is coming over to fit it tonight Now THAT's service. Link to comment Share on other sites More sharing options...
lui Posted July 21, 2008 Share Posted July 21, 2008 Now THAT's service. Tell me Mark of Phoenix will be surely missed here by end of this month when he does his big move over the over side of the world in the land of Oz. Big farewell Part for Mark tomorrow night at Ace Cafe's Supra Only Night, if not doing anything come on down over 50+ supra's going see calendar for full details. Once again hope all goes well at mapping session tomorrow Dean mate. Link to comment Share on other sites More sharing options...
Guest Nicholas Posted July 21, 2008 Share Posted July 21, 2008 you can actually fit the hks core without removing the front bumper good luck tomorrow dean hope it goes well!! Link to comment Share on other sites More sharing options...
b_have Posted July 21, 2008 Share Posted July 21, 2008 You may need to shorten you existing hardpipe, the HKS~R has cast end tanks that form the 90deg exit. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now