pa06has Posted July 20, 2008 Share Posted July 20, 2008 I think i have a problem! My 1st turbo is running at 0.6bar and the 2nd kicks in at 0.7bar. I have upgraded fmic and got all hard pipes, i cant find any leaks so any ideas? Paul Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted July 20, 2008 Share Posted July 20, 2008 (edited) Contents removed due to txt speak. Please do not use txt speak on the forum and especially not in Tech. Thank you. Edited July 20, 2008 by RedM (see edit history) Quote Link to comment Share on other sites More sharing options...
Nic Posted July 20, 2008 Share Posted July 20, 2008 You might need a re-map mate as uv uprated ur intercooler! Take her down the rollers! Huh? I think i have a problem! My 1st turbo is running at 0.6bar and the 2nd kicks in at 0.7bar. I have upgraded fmic and got all hard pipes, i cant find any leaks so any ideas? The second turbo usually comes in around 0.7bar, what is your peak boost with both turbos online? Quote Link to comment Share on other sites More sharing options...
heckler Posted July 20, 2008 Share Posted July 20, 2008 sounds about right if you ask me. Quote Link to comment Share on other sites More sharing options...
heckler Posted July 20, 2008 Share Posted July 20, 2008 You might need a re-map mate as uv uprated ur intercooler! Take her down the rollers! You cant remap the supra unless you have an aftermarket ECU or a piggyback ECU Quote Link to comment Share on other sites More sharing options...
pa06has Posted July 20, 2008 Author Share Posted July 20, 2008 nah thats ecu is standard! when they are both online its 0.7, cars fully bpu but doesnt seem to be running at 1.2 bar Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 20, 2008 Share Posted July 20, 2008 I suppose you have a boost controller ... what is the max boost it indicates ??? Quote Link to comment Share on other sites More sharing options...
pa06has Posted July 20, 2008 Author Share Posted July 20, 2008 yeh have a apexi boost controller, max boost is 1.8 may even be 2bar Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 20, 2008 Share Posted July 20, 2008 2 bar on hybrids and you say you don't feel the power ... strange. Check if the boost controller is well connected and if boost valve is still ok. Even hybrids should not go higher than 1.4 ... and that with piggybback ECU. Are you running piggy back one or not? Quote Link to comment Share on other sites More sharing options...
pa06has Posted July 20, 2008 Author Share Posted July 20, 2008 nah piggyback! im guna make sure everything is working well but im pretty sure its all connected! Quote Link to comment Share on other sites More sharing options...
miko_supra Posted July 21, 2008 Share Posted July 21, 2008 If it's not boosting properly, I would check your bov. Mine is leaking like a biatch, get some blanking plugs and remove it, then see what boost you are getting. i managed an extra 4psi after removing the bov Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.