Terminator Posted July 29, 2008 Share Posted July 29, 2008 (edited) I have the HKS kit with thermostatic valve. The suggested position for the cooler is in the empty front section of the NS front wing/bumper, it mates up perfectly using the brackets provided. If you are contemplating a throttle body feed through the stock battery area, it may not fit with 4" pipes. I have mine in a different location, oil temps are around 90 degrees even in the heat of the past few days, on a fully built high compression engine, with a big turbo. Edited July 29, 2008 by Terminator (see edit history) Link to comment Share on other sites More sharing options...
JamieP Posted July 29, 2008 Share Posted July 29, 2008 I have ended up buying one from Apex (not Apexi;)) not received it yet as its made to measure, Mocal components, i actually think its made there and shipped to Apex, bur anyway it ends up about £185 for made to measure:) Any contact details from where you got it mate. Link to comment Share on other sites More sharing options...
PJ Posted July 29, 2008 Author Share Posted July 29, 2008 Did you buy a kit? Not yet, it's still on my list of things to source. Not managed to get to the Aristo to measure up for the lines yet. How about you? Link to comment Share on other sites More sharing options...
Gruggs Posted July 29, 2008 Share Posted July 29, 2008 Not sure if it helps but i have a kit from mocal and as long as i can find the invoice I'll be able to post up all the part numbers that are required to get the kit direct from them. Its not supra specific but cheaper than HKS etc and may be of use to some people. It includes filter relocation as well. Thanks G Link to comment Share on other sites More sharing options...
JamieP Posted July 29, 2008 Share Posted July 29, 2008 Not yet but need one asap. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted July 29, 2008 Share Posted July 29, 2008 Not sure if it helps but i have a kit from mocal and as long as i can find the invoice I'll be able to post up all the part numbers that are required to get the kit direct from them. Its not supra specific but cheaper than HKS etc and may be of use to some people. It includes filter relocation as well. Thanks G They are dearer direct from mocal,trust me i have checked;) Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted July 29, 2008 Share Posted July 29, 2008 Any contact details from where you got it mate. This is the main site,http://www.apex-performance.co.uk/ but they are also resident traders on the SXOC, and you are also much better contacting them by phone,01274 683633 Link to comment Share on other sites More sharing options...
Guest Nicholas Posted July 29, 2008 Share Posted July 29, 2008 Driftworks now do a thermostatic kit for the 2jzgte with a mocal core for £175 http://www.driftworks.com/catalog/products/thermostatic-oil-cooler-kit.html?osCsid=7724197838190c94a4767999f09fba28 Link to comment Share on other sites More sharing options...
Gruggs Posted July 29, 2008 Share Posted July 29, 2008 They are dearer direct from mocal,trust me i have checked;) sorry i was wrong...it wasnt mocal direct. Just trying to remember who it was now. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted July 29, 2008 Share Posted July 29, 2008 Driftworks now do a thermostatic kit for the 2jzgte with a mocal core for £175 http://www.driftworks.com/catalog/products/thermostatic-oil-cooler-kit.html?osCsid=7724197838190c94a4767999f09fba28 Yes they are great value and i was originally going to get one, but you have to put up with the over long hose length, which is why i went to Apex as they can get hoses made to your spec:) Link to comment Share on other sites More sharing options...
bolarbag Posted July 29, 2008 Share Posted July 29, 2008 which is why i went to Apex as they can get hoses made to your spec Thats why I went my own route and got my lines and fittings from earls I can't see the DW oil cooler, but can't you just tailor the lines to suit what you need? Link to comment Share on other sites More sharing options...
JamieP Posted July 29, 2008 Share Posted July 29, 2008 Just brought the driftworks kit. Link to comment Share on other sites More sharing options...
PJ Posted July 29, 2008 Author Share Posted July 29, 2008 Just brought the driftworks kit. lol - Ironically I did earlier as well Link to comment Share on other sites More sharing options...
Supradoopa Posted July 29, 2008 Share Posted July 29, 2008 Does the driftworks kit come with a sandwich plate with several sensor ports? Link to comment Share on other sites More sharing options...
T2 MSW Posted July 29, 2008 Share Posted July 29, 2008 Driftworks may be getting a fair few orders today then Link to comment Share on other sites More sharing options...
magictorch Posted July 29, 2008 Share Posted July 29, 2008 Will the Driftworks kit be suitable for BPU and Single applications? Link to comment Share on other sites More sharing options...
Supradoopa Posted July 29, 2008 Share Posted July 29, 2008 Looks that way, i'll give them a ring tomorrow Link to comment Share on other sites More sharing options...
magictorch Posted July 29, 2008 Share Posted July 29, 2008 Driftworks may be getting a fair few orders today then Somebody did mention a groupbuy earlier in the thread...lol Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted August 5, 2008 Share Posted August 5, 2008 Just received my Apex kit, pipework made to measure, 16 row cooler as i didn't want to over cool in winter, and good value, same or cheaper than the Driftworks kit:) Link to comment Share on other sites More sharing options...
b_have Posted August 5, 2008 Share Posted August 5, 2008 Just received my Apex kit, pipework made to measure, 16 row cooler as i didn't want to over cool in winter, and good value, same or cheaper than the Driftworks kit:) http://i208.photobucket.com/albums/bb118/Tricky-Ricky13/DSCF2046.jpg That looks identical to mine (I bought direct from Mocal) Link to comment Share on other sites More sharing options...
Jellybean Posted August 13, 2008 Share Posted August 13, 2008 I have Greddy Kit 16 Row with relocation filter kit -- Running for last six months no issues all cool, nice location, Excellent quality Link to comment Share on other sites More sharing options...
b16gtf Posted August 15, 2008 Share Posted August 15, 2008 Hi Guys, Was thinking of getting a Mocal 13 row oil cooler, i have pipes and s/w plate allready. I will be running full bpu soon hopefully do you think 13 row is ok? Thanks Grant Link to comment Share on other sites More sharing options...
bolarbag Posted August 15, 2008 Share Posted August 15, 2008 It will do for BPU and if you dont intend to do Le Mans;) Link to comment Share on other sites More sharing options...
magictorch Posted September 30, 2008 Share Posted September 30, 2008 Just ordered a kit from Speedflow as Apex appear to have a supply problem Link to comment Share on other sites More sharing options...
magictorch Posted October 2, 2008 Share Posted October 2, 2008 Pic of the Speedflow kit Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now