JamieP Posted July 26, 2009 Author Share Posted July 26, 2009 Good thing you didn't mix it up with Tera Patrick. Careful if you google that! Ha, just got your text, ill reply by pm as its cheaper;) Link to comment Share on other sites More sharing options...
csa Posted July 27, 2009 Share Posted July 27, 2009 A cool addition to the interior would be to get hold of a Corbeau sticker, put it on the seat mounts, paint them green and remove the sticker again so the "Corbeau letters" would stick out black on green :-) Link to comment Share on other sites More sharing options...
MarkR Posted July 27, 2009 Share Posted July 27, 2009 You could wear this as a helmet at Suprapod? http://ohiota.com/WSP/Lime_Green_Hard_hat.jpg Link to comment Share on other sites More sharing options...
deathmonkey Posted July 28, 2009 Share Posted July 28, 2009 You could wear this as a helmet at Suprapod? http://ohiota.com/WSP/Lime_Green_Hard_hat.jpg Bit of a random Q, Jamie, but I noticed that the carpet has obviously been dyed, I take it you also did the roof lining? (Looks it to me?!) If so, how did you manage to do that? Cheers, Andy. Link to comment Share on other sites More sharing options...
JamieP Posted July 28, 2009 Author Share Posted July 28, 2009 Bit of a random Q, Jamie, but I noticed that the carpet has obviously been dyed, I take it you also did the roof lining? (Looks it to me?!) If so, how did you manage to do that? Cheers, Andy. Its not Dyed, my car came from the factory like that. Link to comment Share on other sites More sharing options...
supramkivcork Posted July 28, 2009 Share Posted July 28, 2009 Car looks unreal Jamie. Not sure why but the green just works with the black. The cage is mint inside it. Link to comment Share on other sites More sharing options...
MarkR Posted July 28, 2009 Share Posted July 28, 2009 Works for me... Link to comment Share on other sites More sharing options...
deathmonkey Posted July 28, 2009 Share Posted July 28, 2009 Its not Dyed, my car came from the factory like that. Ah nevermind. Thanks anyway Jamie. Link to comment Share on other sites More sharing options...
SupraAyf Posted July 28, 2009 Share Posted July 28, 2009 I quite like the green - its a bit different and that's what it's about sometimes! Nice one Jamie Link to comment Share on other sites More sharing options...
Guigsy Posted July 28, 2009 Share Posted July 28, 2009 A cool addition to the interior would be to get hold of a Corbeau sticker, put it on the seat mounts, paint them green and remove the sticker again so the "Corbeau letters" would stick out black on green :-) Painting the back of the seats green would look cool Link to comment Share on other sites More sharing options...
dude Posted July 29, 2009 Share Posted July 29, 2009 Which cage is that Jamie, the one on their site goes thru the dash!!!! Is it ceretified to be race legal??? Link to comment Share on other sites More sharing options...
JamieP Posted July 29, 2009 Author Share Posted July 29, 2009 Which cage is that Jamie, the one on their site goes thru the dash!!!! Is it ceretified to be race legal??? Its a cusco rear cage, i doubt it is race legal, dont you need a full cage? Link to comment Share on other sites More sharing options...
GazB Posted July 29, 2009 Share Posted July 29, 2009 Here you go, taken from this years HKS rule book GSR 4:10 ROLL BARS (ET 11.99 to 10.00Secs) All roll bars must be within 6-inches (152 mm) of the rear, or side, of the driver's head, extend in height at least 3-inches (76 mm) above the driver's helmet with driver in normal driving position, and be at least as wide as the driver's shoulders or within 1-inch (25.4 mm) of the driver's door. Roll bar must be adequately supported or cross-braced to prevent forward or lateral collapse of roll bar. Rear braces must be of the same diameter and wall thickness as the roll bar and intersect with the roll bar at a point not more than 127 mm (5-inches) from the top of the roll bar. Sidebar must be included on driver's side. The side bar must pass the driver at a point midway between the shoulder and elbow. All vehicles with OEM frame must have roll bar attached to frame; installation of frame connectors on unibody cars does not constitute a frame and therefore it is not necessary to have the roll bar attached to the frame. Unibody cars with stock floor and firewall (wheel tubs permitted) may attach roll bar with 150 mm (6-inch) x 150 mm (6-inch) 3 mm (0.125-inch) steel plates on top and bottom of floor bolted together with at least four 10.0 mm 3/8-inch bolts and nuts or weld main hoop to rocker sill area with 0.125 (3.2 mm) reinforcing plates. All 4130 chrome moly tube welding must be done by approved TIG Heliarc process; mild steel ( or ST51) welding must be approved MIG wire feed or TIG heliarc process. Welding must be free of slag and porosity. Any grinding of welds prohibited. See illustration (PIC. 18). Roll bar must be padded anywhere driver's helmet may contact it while in driving position. Adequate padding must have minimum 1/4-inch (6.35 mm) compression or meet SFI Spec. 45.1. GSR 4:11 ROLL CAGE (ET 9.99 TO 8.50Secs) Roll Cage: All cage structures must be designed in an attempt to protect the driver from any angle, 360-degrees and be fully welded. All 4130 chrome moly tube welding must be done by approved TIG heliarc process; mild steel tube welding must be approved MIG wire feed or TIG heliarc process. Welding must be free of slag and porosity. Any grinding of welds prohibited. Additionally, roll cage must be padded any where the driver’s helmet may contact it while in the driving position. In Competition eliminator where SFI Spec on chassis is required, padding must meet SFI Spec. 45.1 Link to comment Share on other sites More sharing options...
JamieP Posted August 9, 2009 Author Share Posted August 9, 2009 Thought id better update my build thread, as many of you know i got in the 10's at santapod yesterday, full details in this link. http://www.mkivsupra.net/vbb/showthread.php?t=193985 Link to comment Share on other sites More sharing options...
MarkR Posted August 9, 2009 Share Posted August 9, 2009 good job mate! Link to comment Share on other sites More sharing options...
Guest Niklas Posted August 14, 2009 Share Posted August 14, 2009 VERY nice car. Link to comment Share on other sites More sharing options...
Ricky49 Posted August 14, 2009 Share Posted August 14, 2009 Really like this car. Looks awesome Link to comment Share on other sites More sharing options...
JamieP Posted September 18, 2009 Author Share Posted September 18, 2009 (edited) Got my trophy's today, fastest 60ft and fastest 1/4 mile time of the the day at suprapod 2009, well happy with that:) The car is going in to SRD again shortly for a few more mods, need some more power. Precision billet 6765 DBB turbo 1000cc high imp fuel kit with -6 lines Still in two minds if i should fit the jun 256/256 cams or not:search: Whifbitz twin box exhaust (i want to quieten it down a bit so i can do some more trackdays) Duct the fmic fit new oil cooler (last one split) heat wrap manifold and down pipe. Back to Ryan for as much boost as i can have on road fuel. Edited September 18, 2009 by JamieP (see edit history) Link to comment Share on other sites More sharing options...
Jamesy Posted September 18, 2009 Share Posted September 18, 2009 loving the trophies mate - wish i could splash on mine this much!! Link to comment Share on other sites More sharing options...
tooquicktostop Posted September 18, 2009 Share Posted September 18, 2009 I am just waiting for you to put it up for sale, can't be long now Link to comment Share on other sites More sharing options...
JamieP Posted September 18, 2009 Author Share Posted September 18, 2009 I am just waiting for you to put it up for sale, can't be long now Nah i wont sell it. Link to comment Share on other sites More sharing options...
L33 Posted September 18, 2009 Share Posted September 18, 2009 so much for had enough if your modding again! lol! good man! Link to comment Share on other sites More sharing options...
Steve Posted September 18, 2009 Share Posted September 18, 2009 Any news on the new Billet turbo yet? Link to comment Share on other sites More sharing options...
JamieP Posted September 18, 2009 Author Share Posted September 18, 2009 so much for had enough if your modding again! lol! good man! Need to liven it up a bit, getting bored of the power;) Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 18, 2009 Share Posted September 18, 2009 Need to liven it up a bit, getting bored of the power;) I've got a used T51 SPL BB kit available Link to comment Share on other sites More sharing options...
Recommended Posts