MrRalphMan Posted July 9, 2008 Share Posted July 9, 2008 After the top seal was replaced after my recent H&R I am getting wind noise when getting up to three figure speeds, which I did not before. I've taken it back but we found that there is no adjustment on the catch. I've seen previous threads that show how to adjust the glass, but it seems that the top of the door is a few mm proud of the car. If you push the door in it goes flush, it's like the catch is not pulling the door in enough. Anyone got any advice? Cheers, Paul. Quote Link to comment Share on other sites More sharing options...
UltraFlynn Posted July 9, 2008 Share Posted July 9, 2008 According to the workshop manual there is adjustment on the catch. Quote Link to comment Share on other sites More sharing options...
MrRalphMan Posted July 9, 2008 Author Share Posted July 9, 2008 Hmmmm..... Can you describe or attached screen shot... or something Quote Link to comment Share on other sites More sharing options...
Jezz Posted July 9, 2008 Share Posted July 9, 2008 Is it the window sticking out to far or the actual door? Quote Link to comment Share on other sites More sharing options...
MarkR Posted July 9, 2008 Share Posted July 9, 2008 Apparently there is an adjustment to pull the window inwards, but don't quote me on that. I've been to lazy to look as sometimes mine leaks too. Quote Link to comment Share on other sites More sharing options...
colsoop Posted July 9, 2008 Share Posted July 9, 2008 Glass can be adjusted, see attached Quote Link to comment Share on other sites More sharing options...
MarkR Posted July 9, 2008 Share Posted July 9, 2008 Love your work colsoop Quote Link to comment Share on other sites More sharing options...
MrRalphMan Posted July 9, 2008 Author Share Posted July 9, 2008 Thank you very much, might come in handy, but its the top of the metal door that sit proud by a couple of mil. As if the catch needs moving in my.. well a couple of mil. Quote Link to comment Share on other sites More sharing options...
colsoop Posted July 9, 2008 Share Posted July 9, 2008 Where exactly do you mean , the door itself is proud of the rear quarter by a few mil or somewhere else ? Quote Link to comment Share on other sites More sharing options...
MrRalphMan Posted July 9, 2008 Author Share Posted July 9, 2008 Yes, back of the door is slightly proud of the rear quarter (And where the trim is up the top). Seems even all the way down. Quote Link to comment Share on other sites More sharing options...
colsoop Posted July 9, 2008 Share Posted July 9, 2008 Yes, back of the door is slightly proud of the rear quarter (And where the trim is up the top). Seems even all the way down. I can't seem to find a post i made where i described how to adjust this. basically you need to pry the little black plastic cover off the latch for the door exposing 2 torx bolts. Loosen these then push the latch inwards. tighten bolts and check door fitment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.