jevansio Posted July 8, 2008 Share Posted July 8, 2008 I know it's already been asked about not running BOV's on cars, & that it's supposedly OK, but I can anyone (esp CW ) give me confirmation that's it's still OK on a large turbo running high boost (T51R @ 1.6 BAR). I'll be replacing my IC pipework with custom stuff the exact diameter of my throttle body all the way through (incl FIMC endtanks) and would be a good opportunity to dump the BOV. Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 8, 2008 Share Posted July 8, 2008 (edited) When i first got the T88 supe it never had a dump valve for a few months...... but it did blow up:d think it was more due to the 1.8bar i was running;) Edited July 8, 2008 by JamieP (see edit history) Quote Link to comment Share on other sites More sharing options...
gaz1 Posted July 8, 2008 Share Posted July 8, 2008 I know it's already been asked about not running BOV's on cars, & that it's supposedly OK, but I can anyone (esp CW ) give me confirmation that's it's still OK on a large turbo running high boost (T51R @ 1.6 BAR). I'll be replacing my IC pipework with custom stuff the exact diameter of my throttle body all the way through (incl FIMC endtanks) and would be a good opportunity to dump the BOV. are you slowly losing your chaviness jay:D:p Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 When i first got the T88 supe it never had a dump valve for a few months...... but it did blow up:d think it was more due to the 1.8bar i was running;) Was it the turbo itself that failed Jamie? are you slowly losing your chaviness jay:D:p Just got to sell my Burbery Cap & I'll be there, wanna buy it Quote Link to comment Share on other sites More sharing options...
mikeyb10supra Posted July 8, 2008 Share Posted July 8, 2008 wont make a difference mate, no different from a normal singled car...they all suffer from compressor surge so wont matter + one less thing on the car that can leak Quote Link to comment Share on other sites More sharing options...
gaz1 Posted July 8, 2008 Share Posted July 8, 2008 Was it the turbo itself that failed Jamie? Just got to sell my Burbery Cap & I'll be there, wanna buy it to add to my collection:eyebrows: Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 8, 2008 Share Posted July 8, 2008 Nah turbo was fine, piston ring failed and small part broke away. Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 one less thing on the car that can leak Cool, Nah turbo was fine, piston ring failed and small part broke away. That's good (not the engine failing, the fact it wasn't the turbo ), think I may go this way on the new setup Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted July 8, 2008 Share Posted July 8, 2008 off topic but how do you find the t51 turbo jay ??? Thinking of going that route myself in the next 2 months Quote Link to comment Share on other sites More sharing options...
uk-rich Posted July 8, 2008 Share Posted July 8, 2008 i have 2 x hks ssqv (dusty's reccomendation), already had one, was going to go with hks racing i get no compressor stall at all now, i have one near the throttle body, and one about 2 feet from the turbo Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 off topic but how do you find the t51 turbo jay ??? Thinking of going that route myself in the next 2 months Havn't got it yet Shane, I'll let you know as soon as it's on though PS I have just wrapped that lead up & the iPod connector, it'll be posted tomorrow Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 i have 2 x hks ssqv (dusty's reccomendation), already had one, was going to go with hks racing i get no compressor stall at all now, i have one near the throttle body, and one about 2 feet from the turbo I quite like the compressor stall noise Quote Link to comment Share on other sites More sharing options...
uk-rich Posted July 8, 2008 Share Posted July 8, 2008 yeah i know what you mean, the noise might come back when we crank the boost up i'm not sure if turbo's mind being stalled or not tho Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 yeah i know what you mean, the noise might come back when we crank the boost up i'm not sure if turbo's mind being stalled or not tho They have an anti-surge housing don't they? does that mean they can withstand compressor surge? Quote Link to comment Share on other sites More sharing options...
uk-rich Posted July 8, 2008 Share Posted July 8, 2008 not sure, not sure who would know either Quote Link to comment Share on other sites More sharing options...
bolarbag Posted July 8, 2008 Share Posted July 8, 2008 I'll be replacing my IC pipework with custom stuff the exact diameter of my throttle body all the way through (incl FIMC endtanks) and would be a good opportunity to dump the BOV. Who said it was ok to dump the BOV? Why would you risk putting excess forces on the shaft? If your getting custom piping done I'd just use a recirculated tial 50mm, you shouldnt get compressor surge with one of those at your power If you have the anti surge housings - which are an option you will be losing response Just because doing away with something takes a long time to produce any results doesnt mean its ok Keep your bov, and have it recirculated to dim the noise Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 8, 2008 Author Share Posted July 8, 2008 Chris Wilson was who I first heard it off. I know it's quite an "out there" idea, which is why I was after opinions, I'm still a little uncertain as what I don't want to do is destroy a T51R, if there's any doubt in my head when it comes to getting the pipes made I'll go with the safe option of my current Tial BOV. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 8, 2008 Share Posted July 8, 2008 I was helping a friend work on something VERY exotic at Donington today. A Nissan R90 CK Group C car, probably the most complex and fastest Group C car of the early nineties, if not all time excluding the V6 cars (these were twin turbo V8's) The electronics and pneumatics were simply awesome, as was the build quality and on track, its speed. Did it have a BOV? No. It did have ecu controlled twin IC bypass valves, WI, cockpit adjustable boost, mixture and timing, individual cylinder knock sensors, and EGT prbes that also were read and acted on by the ECU. Complex is actually an understatement. The engine ECU had 4 MIL connectors with about 300 pins in total. I am sure if a BOV was a performance aid, or, as this was a winning 24 hour car, an aid to longevity, it would have had one or more. They are noise reducing devices, for production cars, and noise creating devices, for the aftermarket. It's one of my favourite race cars of all time, chancing on it in the pit garages on a (albeit upmarket) track day was good enough, to find it being run by a pal of mine and given free access to it, inside and out was a dream. I am still on a high, a simply stunning machine.http://www.gatesgarth.com/NissanR90CK.JPG Quote Link to comment Share on other sites More sharing options...
bolarbag Posted July 8, 2008 Share Posted July 8, 2008 It did have ecu controlled twin IC bypass valves, What did these do, I gather they werent to aid compressor stall if they bypassed the IC? BOV's may be one of those items that make logical sense but are not needed, but then you have to ask why toyota implemented one on their car to begin with, even at such low boost Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 8, 2008 Share Posted July 8, 2008 They allowed pressurised air to bypass the 2 intercoolers unless the air temps went above a preset limit, thay then slowly opened to allow just enough air through the I/c's to keep air temps under control. Fully open ALL air went through the 2 I/c's, fully shut all air bypassed both I/c's. Very trick! If only I had a camera with me, the thing was awesome in complexity and execution. Toyota used the BOV on the MKIV TT to quell noise, simple as that. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 8, 2008 Share Posted July 8, 2008 (edited) They were quite quick, too, quick enough to make F1 cars of the same era look slow..: http://uk.youtube.com/watch?v=6lMItc4cy8U agbennett in the replies is my pal. Edited July 8, 2008 by Chris Wilson (see edit history) Quote Link to comment Share on other sites More sharing options...
bolarbag Posted July 8, 2008 Share Posted July 8, 2008 They allowed pressurised air to bypass the 2 intercoolers unless the air temps went above a preset limit, thay then slowly opened to allow just enough air through the I/c's to keep air temps under control. Fully open ALL air went through the 2 I/c's, fully shut all air bypassed both I/c's. Very trick! If only I had a camera with me, the thing was awesome in complexity and execution. Very trick indeed:) I had thought of a similar system that bypassed the compressor and IC to allow more N/A type response, but I guess there would be issues with leaks and its too much hassle for a road car - has this ever been done before? Quote Link to comment Share on other sites More sharing options...
Thorin Posted July 9, 2008 Share Posted July 9, 2008 I was helping a friend work on something VERY exotic at Donington today. A Nissan R90 CK Group C car, probably the most complex and fastest Group C car of the early nineties, if not all time excluding the V6 cars (these were twin turbo V8's) The electronics and pneumatics were simply awesome, as was the build quality and on track, its speed. Did it have a BOV? No. It did have ecu controlled twin IC bypass valves, WI, cockpit adjustable boost, mixture and timing, individual cylinder knock sensors, and EGT prbes that also were read and acted on by the ECU. Complex is actually an understatement. The engine ECU had 4 MIL connectors with about 300 pins in total. I am sure if a BOV was a performance aid, or, as this was a winning 24 hour car, an aid to longevity, it would have had one or more. They are noise reducing devices, for production cars, and noise creating devices, for the aftermarket. It's one of my favourite race cars of all time, chancing on it in the pit garages on a (albeit upmarket) track day was good enough, to find it being run by a pal of mine and given free access to it, inside and out was a dream. I am still on a high, a simply stunning machine.http://www.gatesgarth.com/NissanR90CK.JPG Holy Giant Photo Batman! That looks very cool though, did you get a drive? Quote Link to comment Share on other sites More sharing options...
jevansio Posted July 9, 2008 Author Share Posted July 9, 2008 Will I suffer from popping pipes off all the time, will I need locking mechisms on the connectors for this? (like spring clips of some sort) Quote Link to comment Share on other sites More sharing options...
bolarbag Posted July 9, 2008 Share Posted July 9, 2008 You could use those accufab clamps or the wiggins if that was the case, but I've heard varied reports these leak I think its more to do with the welding of the ferrules rather than the actual clamps though, If your having custom pipes done why dont you try a bespoke clamping system, or springs attached to weld points on both of the pipes (like the HKS Ti back box), overkill I agree but it should prevent your pipes popping off Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.