TRACIE_LOU Posted July 3, 2008 Share Posted July 3, 2008 here are a few pics of how i installed my shifter first remove trim around gear stick remove ashtray and pull up push down on the black plast cover at the bottom of gear lever to reveal two screws and remove now pull gear nob off od wires will be attached decision time remove wires from od switch or cut i just mine and used connectors supplied now install alloy bung by screwing it onto shaft you need to set the height so it engages button on lever now route the cabbles so they dont catch when you change gears install lever onto shaft and secure with three grub screws re install trim job done this is how i did it not the difinitive way just a guide Quote Link to comment Share on other sites More sharing options...
R Black Posted July 3, 2008 Share Posted July 3, 2008 Nice job a bit fiddly but doable Quote Link to comment Share on other sites More sharing options...
TRACIE_LOU Posted July 3, 2008 Author Share Posted July 3, 2008 yes it was im sure its easier than i made it look lol but not to bad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.