creative Posted June 20, 2008 Share Posted June 20, 2008 (edited) It was a nice day today so I decided to get the wiring put into my car for my Install that I will be putting in. Upon stripping the interior out I found loads of random connectors that arent connected to anything...Did all supra's come with the same wiring loom, then depending on what spec was chosen, the correct connectors were used? I also found one under the drivers carpet against the transmission tunnel. Ive attached a pic. Now this one wasnt connected but it goes from the loom next to the auto shifter, through the connector as shown and through a grommet in the floor. I havent notice the car having any problems but before I connect it back up does anyone know what it does? cheers folks also does Les still frequent the forums? I have some random switches that dont really do anything and he might know what they do/did. Edited June 20, 2008 by creative (see edit history) Quote Link to comment Share on other sites More sharing options...
creative Posted June 21, 2008 Author Share Posted June 21, 2008 no one? Quote Link to comment Share on other sites More sharing options...
Steve Posted June 21, 2008 Share Posted June 21, 2008 Looks like the Cat temp sensor cable. If you have decats it can be unplugged and removed. Quote Link to comment Share on other sites More sharing options...
Jay_vr6 Posted June 21, 2008 Share Posted June 21, 2008 yep looks about the right place for the cat temp sensor, i just removed my first cat and pulled all that out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.