daz Posted June 1, 2008 Share Posted June 1, 2008 hi any one got the the flat bar wot in the front bumper i have the clips there for one . cheers daz Link to comment Share on other sites More sharing options...
Nic Posted June 2, 2008 Share Posted June 2, 2008 I can supply a brand new one if needed, they come pre-painted. Link to comment Share on other sites More sharing options...
daz Posted June 2, 2008 Author Share Posted June 2, 2008 I can supply a brand new one if needed, they come pre-painted. ok how much nic ok on pay pal by my mate. cheers daz Link to comment Share on other sites More sharing options...
keener Posted June 3, 2008 Share Posted June 3, 2008 I'm waiting for a new grill to be delivered in the next few days at which point I'll be taking the bar out of the middle of the 'mouth' of my facelift. Let me know if you're still looking. Link to comment Share on other sites More sharing options...
daz Posted June 3, 2008 Author Share Posted June 3, 2008 hi bud send me pic off it when you get it . how much you want for it i will pay pal if that ok cheers daz Link to comment Share on other sites More sharing options...
keener Posted June 3, 2008 Share Posted June 3, 2008 I take it you mean this bit http://farm4.static.flickr.com/3126/2548736482_1abdf262f9_o.jpg And there's a black bit just under it too (cliped to the bottom of the 'mouth') do you want that bit too? I've only looked very quickly but it seems to have plastic clips holding it in which might get damaged when I take it out. Do you have these clips to install it in yours? I'm going to be super careful when removing it but you never know! Link to comment Share on other sites More sharing options...
daz Posted June 3, 2008 Author Share Posted June 3, 2008 that the one , i do not have the clips so how much bud cheers daz Link to comment Share on other sites More sharing options...
movistar Posted June 4, 2008 Share Posted June 4, 2008 They are held in by two 10mm bolts..one at either end..hope this helps. Link to comment Share on other sites More sharing options...
colsoop Posted June 4, 2008 Share Posted June 4, 2008 4 self tappers hold it at the ends and the original plastic bumper strips (top and bottom) secure it via the plastic screws. it only goes on one way. About £25 from Toyota. Link to comment Share on other sites More sharing options...
Recommended Posts