kosmic Posted May 28, 2008 Share Posted May 28, 2008 Could someone be kind enough and measure the distance from the surface of the disc/brake pad out to the face of the caliper? (for wheel clearance measurements) Many thanks in advance Link to comment Share on other sites More sharing options...
kosmic Posted May 28, 2008 Author Share Posted May 28, 2008 Anyone?? Link to comment Share on other sites More sharing options...
ukApache Posted May 28, 2008 Share Posted May 28, 2008 i'll do it when i get home, in a coupe of hours Link to comment Share on other sites More sharing options...
dini_the_owl Posted May 28, 2008 Share Posted May 28, 2008 i asked the same question along time ago and no one could be arsed to check! Link to comment Share on other sites More sharing options...
Jay_vr6 Posted May 28, 2008 Share Posted May 28, 2008 just checked for you, 6cm from disc face to outside of caliper at its widest width. probably want to say at leasy 6.5cm to be sure Link to comment Share on other sites More sharing options...
kosmic Posted May 28, 2008 Author Share Posted May 28, 2008 Fantastic buddy, i thought it would be less than that so thats deffo from the face of the disc to the logo'd side of the caliper? Link to comment Share on other sites More sharing options...
kslb Posted May 28, 2008 Share Posted May 28, 2008 Just measured as well and yes 6cm is right I thought it would have been more. Link to comment Share on other sites More sharing options...
kosmic Posted May 28, 2008 Author Share Posted May 28, 2008 fantastic guys!! thank you all Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted May 28, 2008 Share Posted May 28, 2008 This might be of use (post #60) http://www.mkivsupra.net/vbb/showthread.php?t=18157&highlight=wheels&page=2 Link to comment Share on other sites More sharing options...
kosmic Posted May 28, 2008 Author Share Posted May 28, 2008 This might be of use (post #60) http://www.mkivsupra.net/vbb/showthread.php?t=18157&highlight=wheels&page=2 Interesting, so my brembo 4-pots are the same width as the Uk spec calipers...lovely Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now