Paul372 Posted May 28, 2008 Share Posted May 28, 2008 hi, i ve got a problem with my facelift indicators i brought them form ebay they came from usa but when i went to fit them the blubs and blub holders are to big to fit into the facelift indicator. so do i get smaller blubs and blub holders to fit the facelift indicators if so where can i get them from or do i make the holes bigger on the facelift indicators for the orginal blubs and blub holders to fit can anyone help with this problem have one of you guys done this cheers Quote Link to comment Share on other sites More sharing options...
JohnnyW Posted May 28, 2008 Share Posted May 28, 2008 (edited) You need to get new wiring looms from Toyota. Part number: 81515-14390 (x 2) This guide will reveal all: How to fit facelift indicators Edited May 28, 2008 by JohnnyW (see edit history) Quote Link to comment Share on other sites More sharing options...
Paul372 Posted May 28, 2008 Author Share Posted May 28, 2008 thanks for that mate thats wicked big help dont look to hard to do cheers, can you remember how much those parts where Quote Link to comment Share on other sites More sharing options...
JohnnyW Posted May 28, 2008 Share Posted May 28, 2008 No problem! I'm pretty sure it was about £20 for the 2. Quote Link to comment Share on other sites More sharing options...
Paul372 Posted August 22, 2008 Author Share Posted August 22, 2008 big thanks JohnnyW, i ve done it, the looms costed me £30 from steve manley, my sup looks much better now. only one problem indicators are working fine but the side lights on the new facelift indicators are ont, i ve checked all my connections they are fine the only reason i can think of is that i used 17amp wire because it was what i had should i change it to 5amp wire could this be the problem Quote Link to comment Share on other sites More sharing options...
Paul372 Posted August 23, 2008 Author Share Posted August 23, 2008 anyone got the side lights bit on there facelift indicators working Quote Link to comment Share on other sites More sharing options...
SimonB Posted August 23, 2008 Share Posted August 23, 2008 big thanks JohnnyW, i ve done it, the looms costed me £30 from steve manley, my sup looks much better now. only one problem indicators are working fine but the side lights on the new facelift indicators are ont, i ve checked all my connections they are fine the only reason i can think of is that i used 17amp wire because it was what i had should i change it to 5amp wire could this be the problem No, that would make no difference. Quote Link to comment Share on other sites More sharing options...
Paul372 Posted August 23, 2008 Author Share Posted August 23, 2008 funny?, i followed the guide how to fit the facelift indicators, for side lights join red wire to green wire on the new loom for the facelift indicators then cut into the green side light wire that goes to the headlight and join the red wire to that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.