Deacon2k Posted May 25, 2008 Share Posted May 25, 2008 ok guys just got my supra TT yesterday and am nt sure if the traction control or boost gauge is working Traction Control In the fuel gauge of the dash there is a text flashing orange can't remember what is says but i can't turn it off. when i press the traction control button it still stays flashing what does this mean?? any help would be nice also the boost gauge does'nt seem to move does this only move when hitting the red line or should it be moving all through the revs until i let off the throttle. Quote Link to comment Share on other sites More sharing options...
imi Posted May 25, 2008 Share Posted May 25, 2008 when you press the traction control button - this should appear permanently on in the dash cluster. when traction control kicks in, the light will start flashing in the dash cluster. when you are driving in good grip conditions, the traction control light should be OFF. Quote Link to comment Share on other sites More sharing options...
TurboBrett Posted May 25, 2008 Share Posted May 25, 2008 ok guys just got my supra TT yesterday and am nt sure if the traction control or boost gauge is working Traction Control In the fuel gauge of the dash there is a text flashing orange can't remember what is says but i can't turn it off. when i press the traction control button it still stays flashing what does this mean?? any help would be nice also the boost gauge does'nt seem to move does this only move when hitting the red line or should it be moving all through the revs until i let off the throttle. The boost gauge tells you what pressure is in the inlet manifold, if its not moving its either not hosed up or broke the flashing orange light is the "track con off light" it stays on permanently when the traction control is turned off the green light below this tells you if the traction control is active, ie cutting power, if the track con off light is flashing about second on 1 second off then there is a fault in the traction control system and it has been disengaged, to find the problem you need to pull the error codes out the ecu, ill try find a link to a how too.. the track con cant be re engaged or user selectable until the ecu has been reset and the error it is detecting is fixed;) Quote Link to comment Share on other sites More sharing options...
TurboBrett Posted May 25, 2008 Share Posted May 25, 2008 (edited) i cant find a how to on the track con ecu but i posted the manual in pdf on this thread Clicky post #4 it tells you in there under the header SELF-DIAGNOSTIC SYSTEM Edited May 25, 2008 by TurboBrett (see edit history) Quote Link to comment Share on other sites More sharing options...
Deacon2k Posted May 25, 2008 Author Share Posted May 25, 2008 thanks for that mate il take a look at the pdf and let u know how i get on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.