jevansio Posted May 20, 2008 Author Share Posted May 20, 2008 (edited) Well I've been out for a blast in it all evening & it's def developed a missfire again . It got worse to a point where it would struggle to pull in 6th Looks like 1.6 BAR has shown up some gremlins in my ignition system . When we fitted the sparkplugs we noticed a couple of coilpack connectors weren't in the best condition so I'm going to get a new set of them. Also Ryan noticed the voltage was a bit low so I'm going to get a new alternator aswell. I've got a spare set of coilpacks so we can rule them out too. So 1.6 BAR has lasted 1 day :D PS can anyone point me in the right direction of getting some new coilpack connectors? EDIT don't worry sorted now Edited May 20, 2008 by jevansio (see edit history) Link to comment Share on other sites More sharing options...
Mike B Posted May 20, 2008 Share Posted May 20, 2008 Cool... sounds awesome. Where do you measure 1.6.. at the manifold? I run 1.5 at the compressor housing, but the car is mapped to 1.8. Link to comment Share on other sites More sharing options...
jevansio Posted May 20, 2008 Author Share Posted May 20, 2008 It was Yeah the 1.6 is what the AEM sees via the MAP sensor Link to comment Share on other sites More sharing options...
absz Posted May 20, 2008 Share Posted May 20, 2008 What clutch are you running to handle that sort of power:innocent: Link to comment Share on other sites More sharing options...
jevansio Posted May 20, 2008 Author Share Posted May 20, 2008 The RPS Stage 3, it's a right PITA to use everyday, good once moving but pulling away aint Link to comment Share on other sites More sharing options...
Ryan.G Posted May 20, 2008 Share Posted May 20, 2008 So 1.6 BAR has lasted 1 day :D Get them coil pack connectors done before michel wants a race Link to comment Share on other sites More sharing options...
Kopite Posted May 20, 2008 Share Posted May 20, 2008 Michel's still thinking about that 'busa turbo Ryan Link to comment Share on other sites More sharing options...
Jazzy Posted May 20, 2008 Share Posted May 20, 2008 So 1.6 BAR has lasted 1 day :D Bloody cars eh! Link to comment Share on other sites More sharing options...
Ryan.G Posted May 20, 2008 Share Posted May 20, 2008 Michel's still thinking about that 'busa turbo Ryan Will need about 3bar to keep up with a Busa turbo if it been setup right. They are insane... Would make an F1 car look damn slow Ryan Link to comment Share on other sites More sharing options...
jevansio Posted May 20, 2008 Author Share Posted May 20, 2008 Get them coil pack connectors done before michel wants a race Will order them tomorrow from Durham Toyota, should be able to start ruling them out shortly. The FAQ says once they start to go (after being put under the strain of a single turbo) they deteriorate quickly, they've sure done that Bloody cars eh! Lol , I'm used to it now with this one Link to comment Share on other sites More sharing options...
Scott Posted May 20, 2008 Share Posted May 20, 2008 Would make an F1 car look damn slow Surely not? Link to comment Share on other sites More sharing options...
Ryan.G Posted May 20, 2008 Share Posted May 20, 2008 Surely not? Obviously not round a track but in a straight line... Yup 400hp on a bike Check youtube for some nice vids Link to comment Share on other sites More sharing options...
Scott Posted May 20, 2008 Share Posted May 20, 2008 Obviously not round a track but in a straight line... Yup 400hp on a bike Still, 400hp on a bike will struggle without a wheelie bar would it not? When is the 400hp actually useable? I understand that on paper it may be quick but in real life? The rolls-royce Y2K had the long wheel base to cope with that. Link to comment Share on other sites More sharing options...
Ryan.G Posted May 20, 2008 Share Posted May 20, 2008 Go to Drag event at Santa Pod when some are running without wheelie bars. I have had the please of working on one Anyway this has gone way OT Link to comment Share on other sites More sharing options...
johnny g Posted May 21, 2008 Share Posted May 21, 2008 Get them ordered Jay! I'm over on Bank Holiday Monday to see Paul - drive across, Matt (Muffleman) is coming over too. Link to comment Share on other sites More sharing options...
Mariusz Posted May 21, 2008 Share Posted May 21, 2008 Jay it was crazy enough before ha I like it.. gonna have to pop up and see how its running You could also give me a hand posting a for sale ad for my car if ya dont mind lol Link to comment Share on other sites More sharing options...
jevansio Posted May 21, 2008 Author Share Posted May 21, 2008 Went to get some connectors from Michel this evening (many thanks dude ). Changed all the connectors over to the new ones. I thought I'd check the plugs just incase there was anything untoward. When I took the coilpacks off I noticed this yellow residue (like jelly). Everyone had it in, I'll get some pics in a bit. Anyway, I checked my other set & they were spotless so thought what the hell I'll swap them too. Just been out & the miss is totally fixed, the car felt better straight away at tickover. So we're back to 1.6 BAR and start the day count at 0, lets see if I can beat 1 this time Link to comment Share on other sites More sharing options...
Chingy Posted May 21, 2008 Share Posted May 21, 2008 awesome love to hear and see it go Link to comment Share on other sites More sharing options...
jevansio Posted May 21, 2008 Author Share Posted May 21, 2008 awesome love to hear and see it go Cheers Chingy, will try & get some vids with sound v soon Link to comment Share on other sites More sharing options...
SilverSoop Posted May 21, 2008 Share Posted May 21, 2008 I've just come in after spending the last 2 hours with Ryan upping the boost & general tinkering with the map. We started by upping the boost to 1.4 BAR & it started missing like mad, it was about time the plugs were changed so we came back to mine & put a fresh set in (grade 8 too as opposed to 7 which was what was in). It sorted the miss straight away, basically after a number of motorway runs Ryan had done it's stuff. The car is mental now, 3rd gear really makes your guts turn & in this weather traction is great. Going to try & get some launching practice in now then a run to a RWYB day at York Big thanks to Ryan for delivering the goods again Just read this thread...Wow! :d:d What bar were you running before you started upping the boost Jevansio?? Link to comment Share on other sites More sharing options...
JamieP Posted May 21, 2008 Share Posted May 21, 2008 Still, 400hp on a bike will struggle without a wheelie bar would it not? When is the 400hp actually useable? I understand that on paper it may be quick but in real life? The rolls-royce Y2K had the long wheel base to cope with that. Need a lengthened swingarm for a 400bhp bike, i rode a 270bhp turbo ZX9 on stock swingarm that a mate built and that was insane, pulling wheelies at 170mph:cool: Link to comment Share on other sites More sharing options...
Scott Posted May 21, 2008 Share Posted May 21, 2008 Need a lengthened swingarm for a 400bhp bike, i rode a 270bhp turbo ZX9 on stock swingarm that a mate built and that was insane, pulling wheelies at 170mph:cool: Sounds like great fun I'm still scared to get my bike license in case i end up killing myself lol. Link to comment Share on other sites More sharing options...
JamieP Posted May 21, 2008 Share Posted May 21, 2008 Sounds like great fun I'm still scared to get my bike license in case i end up killing myself lol. Take my advice and dont bother getting a bike license, to easy to kill yaself with all the moron drivers about these days, i stick to dirt bikes these days. sorry for the off topic. Link to comment Share on other sites More sharing options...
SilverSoop Posted May 21, 2008 Share Posted May 21, 2008 Take my advice and dont bother getting a bike license, to easy to kill yaself with all the moron drivers about these days, i stick to dirt bikes these days. sorry for the off topic. I was actually going to go for my bike test asap because of the new bike test rules coming in in sept/oct but im starting to think again about it now... Link to comment Share on other sites More sharing options...
jevansio Posted May 22, 2008 Author Share Posted May 22, 2008 Just read this thread...Wow! :d:d What bar were you running before you started upping the boost Jevansio?? It was on 1.3 BAR before we started (AEM boost solenoid was set at 19 PSI), Ryan had mapped it to 1.4 BAR but I had pulled it back .1 of a BAR when I got my new exhaust on. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now