Guigsy Posted May 17, 2008 Share Posted May 17, 2008 Wonder if someone can help me out. maybe im just blind or dumb... or both. I have a pillar pod. i disassembled my dash and removed the boost gauge from my air vent. pulled the wire through from my glove box where the control box is so it reaches over the other side of the dash and up the pillar... However ill be darned if i can get it behind the dash on the right hand side so it comes up near the windscreen. At the moment i have it coming up and out and looping over so its in view and it looks ugly. Any sugestions? Link to comment Share on other sites More sharing options...
Guigsy Posted May 18, 2008 Author Share Posted May 18, 2008 anyone? :S Link to comment Share on other sites More sharing options...
johnd-mkiv Posted May 18, 2008 Share Posted May 18, 2008 I ran mine under the steering colum, I unbolted the dash near the door pillar and managed to slip the wire around the back of it to run it where the a pilar pod sits. Hope that made sence Link to comment Share on other sites More sharing options...
TurboBrett Posted May 18, 2008 Share Posted May 18, 2008 you can just about squeeze it up into the pillar in the dash, if you take the panel with the key slot out (after the ones needed to get there)the tube where the air vent sits, you want to go underneath that and up the side closest to the drivers side door, if you feel with your fingers you will know where to poke it through, or if you feed a wire down the hole from the top (with pillar off) you should be able to see it, takes abit of bending and aiming of the wire but it goes, honest;) i did it my self about 2 weeks ago:innocent: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now